Accessories

The Pocket Drive HV is an incredibly compact and lightweight high-volume bike hand pump featuring impressive pumping efficiency for large tire applications, e.g. gravel or mountain bikes. It's constructed from durable CNC-machined aluminum and has a knurled barrel for slip-resistant operation. 90 PSI max.

Engineered for road, mountain, or gravel bikes, the comprehensive Pro Tubeless Kit is the perfect all-in-one tubeless tire repair system. It features a compact, lightweight aluminum housing that cleanly integrates a mix of two different-size tire plugs, a plug insertion tool, a plug retention tool, a valve core remover, a CO2 inflator, and a micro knife. Combined, this offers the simplest, most portable way to seal a tubeless tire across any tire size/type and cleanly remove any excess plug remnants with the included knife for a smooth ride home. Additional/replacement plugs are also available separately. Note: Sealing performance may vary based on puncture size, tire size and tire pressure. PRO TUBELESS KIT: - Stainless Steel Reamer/Inserter Tool - Plug Retention Tool - Stainless Steel Knife - Presta CO2 Inflator - 5x 3.5mm and 5x 1.5mm tire plugs

The Strip Drive Pro Alert 400+ Rear is our most advanced taillight with custom-programmed alert technology. It intelligently adjusts its outputs to signal deceleration and stopping, effectively communicating your actions to traffic and fellow cyclists. The light has ten LEDs and a maximum output of 400 lumens; it is engineered for impressive efficiency and runtime, providing the best beam pattern for optimal light dispersion in even the most challenging conditions. Plus, with an impressive 80-hour max runtime, you can rest assured that this light will last as long as you need it to. Offering seven different output modes, including the highly disruptive Daytime Flash that grabs attention and the wide-angle optics providing an impressive 270° visibility range. It features a lightweight yet durable waterproof construction, rigorously tested to IPX7 Waterproofing standards. A versatile mounting system attaches to aero or round seatposts, and the light also features USB-C waterproof charging(cable not included). Look no further, as this cycling tail light delivers unparalleled visibility-during the day or after dark. Note: This light is not being distributed within the German market. - Max 400 lumens / 80-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Wide Angle Optics: 270° of visibility - Waterproof USB-C charging port with charge indicator - Maximum side visibility design - Multiple mounting options with ladder strap - Lightweight and durable co-molded design - Seven combined solid and flash modes - Fits most seatpost shapes - Rigorously tested to IPX7 Waterproofing standards - 1900 mAh battery capacity

Compact tubeless tire repair kit with machined aluminum storage tube that doubles as a handle. Combined tire reamer and insertion tool. Includes five tire plugs. - Weight: 47g

Peace-of-mind with perfect vision and eye protection, allowing you to enjoy the ride. Our goggles are bulletproof, offering perfect fit and cool looks that won't break the bank. They can take impacts like no other, allowing you to look ahead without fear of the roost or branches. Permanent anti-fog and great designs make these goggles a great choice at a great price. - Bulletproof 170° WideVision Lens - Permanent anti-fog function built into the inner lens - Dual-layer, anti-sweat face foam - Self-draining open lower frame design allows dirt to fall from lens - 40mm anti-slip coated strap - OTG—Over-the-glasses fit - Tear-Off ready with posts - Bulletproof lens tested to: ANSI Z87.1-2015 - Military Ballistic Impact Standard (MIL-DTL-43511D) - Optional lenses available from 22-83% light transmission (VLT) - Certified CE EN 1938 :2010

Kryptonite's Evolution Series 4 1090 Integrated Chain is a 10mm-thick, six-sided link chain made of triple-heat-treated manganese steel for maximum strength. At 35.5-inches long, the Evolution gives you biking security in an easy-to-carry package. The links are covered with a weather-resistant nylon sleeve that protects your bike's finish, and it uses an integrated high-security cylinder that is pick, drill, and cut resistant. Three keys are included, including one that has a high-intensity LED bulb for convenient, easy unlocking in the dark. This chain has an anti-theft protection offer.

Keep your stuff safe with Kryptonite's Gripper Combination Padlock. It sports a steel body and a hardened steel shackle for serious strength and protection.

- 3mm hardened steel links for moderate security lockups - Includes easy-to-install transport bracket - Includes 2 keys - Key Safe Program - Product dimensions: Length 100cm - Product weight: 1.90 lbs

Kryptonite's KryptoLok Series 2 995 Integrated Chain is a 9mm-thick, four-sided link chain made of triple-heat-treated manganese steel for serious strength. Its integrated high-security lock cylinder is pick, drill, and cut resistant. This 37.5-inch chain is covered with a weather-resistant nylon sleeve that protects your bike's finish. Plus, the KryptoLok Series 2 has an anti-theft protection offer.

Big cities call for big protection, and Kryptonite's New York Chain delivers with 12mm six-sided chain links made from hardened manganese steel. Wrap this burly lock around your frame worry-free thanks to the durable nylon cover that protects your bike's paint from scratches. Leave with peace of mind knowing the 14mm hardened Max-Performance steel shackle mated to the Evolution Series 4 Disc Lock is on duty. With a double deadbolt design to protect against twist attacks, would-be thieves don't stand a chance. It comes with three stainless steel keys--one of which is lighted for night access!

Specifications & Features: - 7/10 security rating - 13MM HARDENED MAX-PERFORMANCE STEEL SHACKLE resists bolt cutters and leverage attacks - Patent-pending HARDENED DOUBLE DEADBOLT design gives additional protection against twist attacks - SLIDING DUSTCOVER - DOUBLE DEADBOLT DESIGN - HIGHER SECURITY DISC-STYLE CYLINDER is pick and drill resistant. - Includes FLEXFRAME-U BRACKET providing convenient multi-location u-lock transport - 3 STAINLESS STEEL KEYS — including new key design and one LED REPLACEABLE KEY FOB - Protective vinyl coating - Key Safe Program - Product dimensions: 3.25” x 7” (8.3cm x 17.8cm) - Product weight: 3.55 lbs. (1.61 kgs)

Specifications & Features: - 8/10 security rating - 14mm hardened MAX-PERFORMANCE STEEL SHACKLE - 3 STAINLESS STEEL KEYS — including new key design and one LED REPLACEABLE KEY FOB - Patent-pending HARDENED DOUBLE DEADBOLT design gives additional protection against twist attacks - NEW SMALLER CROSSBAR DESIGN - HIGHER SECURITY DISC-STYLE CYLINDER is pick and drill resistant - Includes FLEXFRAME-U BRACKET providing convenient multi-location u-lock transport - Protective vinyl coating - Key Safe Program - Product dimensions: 4” x 9” (10.2cm x 22.9cm) - Product weight: 3.50 lbs. (1.59kgs)

Constantly improving. Kryptonite's New-U generation of U-Locks features a patent-pending double deadbolt design, anti-rotation capability, sliding dust covers, and an updated, modern design. The KryptoLok has a security rating of 6/10 making it a great choice for quick urban stops or longer suburban stops. Specifications & Features: - 6/10 security rating - 12.7mm hardened PERFORMANCE STEEL SHACKLE - Patent-pending HARDENED DOUBLE DEADBOLT DESIGN gives additional protection against twist attacks - HIGH SECURITY DISC-STYLE CYLINDER is pick and drill resistant - Includes 2 STAINLESS STEEL KEYS, with ergonomic design to reduce the amount of torque, and keep them from bending or breaking - Includes 4’ KRYPTOFLEX DOUBLE LOOPED CABLE for securing front wheel or accessories - Includes FLEXFRAME-U BRACKET providing convenient multi-location u-lock transport - Protective vinyl coating - Key Safe Program - Product dimensions: 4” x 9” (10.2cm x 22.9cm) - Product weight: 3.65 lbs (1.66 kgs)

Kryptonite's New-U New York Fahgettaboudit Mini is simply the strongest lock money can buy. Its 10/10 security rating makes it the best choice for quick stops or overnight security in major metropolitan areas, college campuses...pretty much anywhere! Bike thieves can just Fahgettaboudit. Specifications & Features: - 18mm hardened MAX-PERFORMANCE STEEL SHACKLE - Patent-pending HARDENED DOUBLE DEADBOLT design gives additional protection against twist and cut attacks - Patented STEEL SLEEVE over cross bar for double security - HIGHEST SECURITY DISC-STYLE CYLINDER is pick and drill resistant - Sliding dustcover to PROTECT FROM DIRT AND DEBRIS 3 STAINLESS STEEL KEYS - including new design and one LED REPLACEABLE KEY FOB - Key Safe Program - Protective vinyl coating - Product dimensions: 3.25” x 6” (8.3cm x 15.3cm) - Product weight: 4.55 lbs (2.06 kgs)

The New U, the U-Lock redesign from Kryptonite, features expanded double-deadbolt security, anti-rotation capability, and a fresh new design, all making life quite a bit harder for the bike thieves of the world. The New York Lock Standard is the perfect choice for bike security in major metropolitan areas and college campuses. Specifications and Features: - Security rating: 9/10 - 16mm hardened MAX-PERFORMANCE STEEL SHACKLE - Patent-pending HARDENED DOUBLE DEADBOLT design gives additional protection against twist and cut attacks - HIGHEST SECURITY DISC-STYLE CYLINDER is pick and drill resistant - Sliding dustcover to PROTECT FROM DIRT AND DEBRIS - 3 STAINLESS STEEL KEYS - including new design and one LED REPLACEABLE KEY FOB - Includes FLEXFRAME-U BRACKET providing convenient multi-location u-lock transport - Key Safe Program - Protective vinyl coating - Product dimensions: 4" x 8" (10.2cm x 20.3cm) - Product weight: 4.45 lbs (2.02 kgs)

Kryptonite's Transit FlexFrame U-Bracket makes it easy to carry your U-lock on your bike so it's always handy. This simple mount fits on frame tubes from 25 to 80mm in diameter and it accepts most 13 and 16mm-diameter round-shackle U-locks. Plus, the clamp rotates so you can perfectly align the lock with your bike to keep it tucked out of the way.

- The 2.0 Seat improves on the original Shotgun Seat with the addition of a quick release mount, 2 adjustable leg lengths, and more rubber protection. - Designed for children 2 – 5 years (up to 48lb / 22kg) - Quick release for super fast install, removal and swap between bikes - Adjustable width and angle to fit all mountain bikes (not including e-bikes) - Shotgun 2.0 Bars are 250mm in length, with Pro 19mm rubber grips designed for little hands - Bars come with inserts to fit 25.4mm, 31.8mm and 35mm handlebar diameters - Fits all bikes with standard 1-1/8 steerers (10mm clearance required)

The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The adjustable version allows for a variety of different stem angles. Can be used with positive or negative degree stems and additional spacers can be added (5mm to 10mm) above the stem. Note that some of the larger computers will not always work with a steep angled stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer.

K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatible: Garmin EDGE 820, 520, 510, 500, 25 and 20. - Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system - Fits 31.8MM Handlebars - NOT combo compatible - Weight: 48g - Anodized Color- Black

This sea gem shines on just about any color bike. - Comes with black hook and loop velcro for easy installation and removal. Instructions for installation can be found here. - Keeps your face clean and keeps you smiling longer. - Added wing protection keeps dirt/mud/dust/grime out of your fork seals and stanchions, increasing time between suspension services and extending the life of your fork. - Fits most mountain bike wheel size and fork combinations. Not compatible with reverse arch forks. - Flexible, lightweight and extremely durable polyethylene that's made in the USA from energy-conscious manufacturers using sustainable materials.

This mega chill design pairs well with lo-fi beats and acid-wash jeans. - Comes with black hook and loop velcro for easy installation and removal. - Keeps your face clean and keeps you smiling longer. - Added wing protection keeps dirt/mud/dust/grime out of your fork seals and stanchions, increasing time between suspension services and extending the life of your fork. - Fits most mountain bike wheel size and fork combinations. Not compatible with reverse arch forks. - Flexible, lightweight and extremely durable polyethylene that's made in the USA from energy-conscious manufacturers using sustainable materials.

Keeps your face clean and keeps you smiling longer. - Fits most mountain bike wheel size and fork combinations - Comes with black zip ties for easy installation and removal - Made in the USA

Comes with black hook and loop velcro for easy installation and removal. - Keeps your face clean and keeps you smiling longer. - Added wing protection keeps dirt/mud/dust/grime out of your fork seals and stanchions, increasing time between suspension services and extending the life of your fork. - Fits most mountain bike wheel size and fork combinations. Not compatible with reverse arch forks. - Flexible, lightweight and extremely durable polyethylene that's made in the USA from energy-conscious manufacturers using sustainable materials.

Mid-century modern has finally escaped the living room and gracefully landed in our newest collection, Maze Runner. It’s our classiest design yet, available in three righteous colorways across our fender, frame keeper and topcap lineup. - Comes with black hook and loop velcro for easy installation and removal. - Keeps your face clean and keeps you smiling longer. - Keeps dirt, mud and grime out of your fork seals, which will increase time between fork services and can stretch the life of your shock considerably. - Fits most mountain bike wheel size and fork combinations. - Flexible, lightweight and extremely durable material that's recyclable in most states. - Black plastic backside.

This bad hombre will bring the fiesta to the woods, setting off an all-black bike, or pairing well with a variety of blue, red, orange or green bikes. Frame protection is opaque so frame will not be visible under Frame Keeper. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.

- Comes with black hook and loop velcro for easy installation and removal. - Keeps your face clean and keeps you smiling longer. - Added wing protection keeps dirt/mud/dust/grime out of your fork seals and stanchions, increasing time between suspension services and extending the life of your fork. - Fits most mountain bike wheel size and fork combinations. Not compatible with reverse arch forks. - Flexible, lightweight and extremely durable polyethylene that's made in the USA from energy-conscious manufacturers using sustainable materials.

This one's for the screwups and daydreamers and all the fringe in between. The Space Cadet combines two of our favs - galaxy and camo - for our flightiest design yet! - Comes with black hook and loop velcro for easy installation and removal. - Keeps your face clean and keeps you smiling longer. - Added wing protection keeps dirt/mud/dust/grime out of your fork seals and stanchions, increasing time between suspension services and extending the life of your fork. - Fits most mountain bike wheel size and fork combinations. Not compatible with reverse arch forks. - Flexible, lightweight and extremely durable polyethylene that's made in the USA from energy-conscious manufacturers using sustainable materials.

We combined of our two favorites - space & ferns - for one very galactically lush design! - Comes with black hook and loop velcro for easy installation and removal. - Keeps your face clean and keeps you smiling longer. - Added wing protection keeps dirt/mud/dust/grime out of your fork seals and stanchions, increasing time between suspension services and extending the life of your fork. - Fits most mountain bike wheel size and fork combinations. Not compatible with reverse arch forks. - Flexible, lightweight and extremely durable polyethylene that's made in the USA from energy-conscious manufacturers using sustainable materials.

We combined two of our favorites - space & ferns - for one very galactically lush design! Frame protection is opaque so frame will not be visible under Frame Keeper. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.

Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA. - For bikes with a factory mounting plate (includes bolt) - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

The Greenfield KS5 is a center-mounted kickstand. The kickstand is constructed from aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Includes extra long bolt - Kickstand can be cut to a specific length - For bikes without factory mounting plate (includes top plate and bolt)

The Greenfield RetroKit is a retro-mounting kickstand plate designed with a cutaway to clear derailleur cables. - Fits all Greenfield kickstands and most generics - Made in the USA

GNT ANT+/BLE 2-in-1 Speed & Cadence Sensor Black Product description - ANT+ and Bluetooth low energy compatible speed and cadence sensor - Attaches with included zip-ties to the frame - Includes mounts, sensor, and magnets

Features - UD carbon fiber - Specifically designed for the performance rider - Super lightweight at just 14g

Features - High flexibility injected Nylon material - Secure bottle design—no drop guarantee - Right side pull cage option is perfect for off-road or small frames - Weight: 41g

Cage: - Improved reinforced composite material - Redesigned cage bracket Tool: - Nylon reinforced composite storage box - Chromium-vanadium steel body - Clutch 12: 2, 2.5, 3, 4, 5, 6, and 8mm hex, T25, valve core tool, chain tool, 0 and 2 spoke wrenches

Giant's Alloy Rack is light, durable and boasts a center platform, which helps support loads up to 50 lbs. It acts as a partial fender and features a mount for a reflector or taillight (sold separately). This great rack is perfect for carrying panniers and bags (sold separately).

Giant's Arc Fenders features a v-shape drainer that helps remove mud and water efficiently so you stay dry. They easily mount with a front and rear quick-release and, with the single-arm stay mount, they're a stylish addition to your bike. Plus, they're made from a super lightweight poly-carbonate material for long-lasting protection from nasty weather.

RIDE FREE Ditch the heavy pack and saggy saddlebag with the all-new Clutch Crank Storage. Lightweight and right there when you need it with six allens, a chain tool, and a spoke wrench, the Clutch Crank Storage can solve just about any trail-side mechanical. FEATURES: - The smallest multi-function crank-stored tool on the market - Magnetic locking system ensures quiet, stable storage - Quickly and easily mounts in hollow crank spindle - Compatible with hollow-spindle SRAM, Shimano, and Praxis cranks - Includes 2.5 to 6mm allens, a T25 Torx, a valve core remover, spare chain links, and a spoke wrench SPECIFICATIONS: - Tools: 2.5, 3, 4, 5, 6mm Hex, T25, Chain breaker, Spare chain links storage, Spoke wrench - System: Compatible with Sram & Shimano & Praxis Cranks - Sizes: 100x 32 x 19mm (TBC) - Weight: 84g - Material: High-density plastic

INVISIBLE INFLATION Lightweight, firmly attached and quiet, but easily accessible when you need it, the Giant Clutch Fork Storage kit fits a CO2 cartridge and inflator right into your fork’s steerer tube and helps you ride pack-free. FEATURES: - Invisible until you need it - Multiple taper mounting design - Rubber mallet installation, no need for any glue or adhesive - Carries a 16g or 25g CO2 cartridge and inflator (cartridges sold separately) SPECIFICATIONS: - Tools: 16g or 25g CO2 Cartridge, CO2 inflator Sizes: 160 x 40 x 21mm - System: Compatible with RockShox & Fox & DVO Forks - Weight: 118g (with a 25g CO2 cartridge) - Material: Aluminum

Giant's Control Blast 2 CO2 Inflation Kit consists of an inflator head that fits Presta valves and a 16-gram threaded CO2 cartridge. It also accepts 12-, 16-, 20- and 25-gram threaded CO2 cartridges. The head features controllable air release so you can fine-tune your pressure.

Giant's Control Mini MTB Pump boasts a lightweight, durable telescoping aluminum barrel that inflates even the widest mountain bike tires quickly. It has a thumb-lock head that works on all valve types and inflates up to 90 psi.

Giant's Control Mini Road Pump boasts a lightweight, durable telescoping aluminum barrel that inflates high-pressure road tires quickly. It has a thumb-lock head that works on all valve types and can inflate up to 120 psi.

Giant's Control Mini Road+ Pump boasts a lightweight, durable CNC-machined aluminum barrel made to pump up high-pressure road bike tires quickly. Plus, this mighty mini features a hose for easy, confident inflation which hides inside for a clean look and works on all valve types.

Giant's Control Patch Kit consists of 2 tire levers, 6 glueless patches, 4 vulcanized/glue patches, a tube of glue and some sandpaper. Buy a bunch of them and make sure you have 1 in every seat bag and hydration pack you own.

- Easy-to-read 2.5" raised gauge - Durable steel barrel and base - Ergonomic handle with ball inflation accessory storage - AutoHead™ with anodized alloy accents and pressure release button - 160psi rating

- Easy-to-read 3.0" gauge - AutoHead™ with ball inflator accessories - Aluminum barrel and plastic base - 160psi rating

- Robust universal stand - User friendly - Alloy construction - Adjustable length via a twist knob

- 500WH. - Compact version of EnergyPak Smart cleanly integrated into the frame. - All-new 500Wh compact battery boosts the range of performance E-bikes. - Advanced Battery Management System optimizes charging performance through continuous communication between the battery and charger. - EnergyPak Smart Compact 500 can charge up to 80 percent in 2 hours 20 minutes. - Compatible with our EnergyPak Plus range extender. - Doesn't include downtube cover. - 40 cells. - Maximum charging current: 6A. - Weight: 4.1kg.

Features - Alloy bottle cage - 6mm alloy rod - Tough and still flexible - Compatible with various water bottles

Available in 3 liter, 4 liter and 4.5 liter sizes the H2Pro Frame Bag is designed to store bulky items within the bike frame without altering the bike’s center of gravity or handling characteristics. Constructed with our all-new H2Tex three-layer waterproof fabric and a high-quality water and dust proof zipper, the H2Pro Frame Bag features a hidden port that allows you discrete access to the bag for charging batteries or connecting to a hydration bag. - Giant-exclusive H2Tex 3-layer waterproof material - Hidden port design, perfect for charging cables or hydration hoses - Interior storage pocket helps keep contents organized an in place - High-Quality water/dust proof zipper SPECIFICATIONS - Material: H2Tex three-layer waterproof fabric - Colors: Black - Size: 43.5 x 6 x 11.5cm (3L), 46.5 x 6 x 13cm (4L), 50 x 6 x 14 cm (XL) - Volume: 3L, 4L, 4.5L

The H2Pro Handlebar Bag has dual roll closures and an air bleed valve, allowing you compact and flexible storage capacity. With a three-point attachment fastening system, designed to securely stabilize the pack in the center of the cockpit as well as eliminate abrasion issues, the H2Pro Handlebar Bag also has a headlight attachment, reflective strips to increase visibility as well as an extension attachment for the H2Pro Accessory Bag. FEATURES - Dual roll closure and an air bleed valve to assist with compression provide flexible packing and adjustable capacity - Three point attachment for maximum stability - Light attachment mount and reflective design for added safety - Compatible with H2Pro Accessory Bag SPECIFICATIONS - Cover material: H2Tex three-layer waterproof fabric - Dry Bag material: 210D Nylon with PTU Film - Colors: Black - Size: 48 x 24cm Max (M), 55 x 27cm Max (L) - Volume: 9L (M), 12.5L (L)

Ideal for carrying a water bottle or extra nutrition, the H2Pro Stem Bag features a Cyberian cord lock, allowing easy one-handed access while riding. With a three-point attachment system, the H2Pro Stem Bag can be used on the stem or handlebar and features a drainage hole at the base to keep contents dry. FEATURES - Side mesh design for energy bar storage - Mesh drainage hole at the bottom helps keep contents dry - Can opened or closed with one-hand while riding - Three-point attachment system allows it to be used on the bar or the stem - Cyberian cord lock ensures internal items stay secure SPECIFICATIONS - Material: 70% Nylon and 30% PU - Colors: Black - Size: 10x7x19cm - Volume: 1.3L

- Replacement mini-tool for Clutch Crank storage - Includes 2.5 to 6mm allens, a T25 Torx

- Maximum output to 20 lumens - ANSI certified lumens and runtime - IPX4 water resistant - Power status indicator alerts remaining run-time before powering off - Light memory mode - Compatible with Rev Comp, Compel, Roost, Strive, Lanza, Coveta, Liv Rev Comp and Luta series helmets

When a flat strikes, this organized kit will get you rolling in no time. Kit Includes: - Control Blast 0 Inflator Head - Mtb Kit: (65067) 2, 25G Threaded Co2 Cartridge - Road Kit: (65066)2, 16G Threaded Co2 Cartridge - Ratchet System Multi-Tool (2, 2.5, 3, 4, 5 ,6Mm Hex, T10, T25 Torx And Flathead) - Giant tire levers

Features - Required fender mounting bracket when installing the Rack-It Metro E rack to E-Bikes with fenders - Provides the needed support for the rear fender when upgrading to the Rack-It Metro E Rack

- Reliable and high quality LED Lamps and strips from leading manufacturer CREE - Total internal reflection (TIR) lenses draw LED light into efficient, well-controlled beams that maximize the usable lumens in the target area without glare - Precisely milled CNC 6061 Aluminum Housing for durability as well as fast heat dissipation - IPX6 waterproof rating - Different from traditional lithium battery bike lights, RECON-E lights are designed to plug into and work with most major - E-bike motor systems - Handle bar remote switch for on the fly control - Three mounting options - ANSI Certified

Take your riding to the next level with the addition of speed and cadence. Features - Sensor magnet kit for RideSense speed and cadence sensors Kit includes: - RideSense speed magnet - RideSense cadence magnet