Accessories

Breaking a sweat? Grab some Nuun Sport! When you sweat, your body loses vital minerals and electrolytes that need to be replaced for healthy recovery and lasting performance. Nuun Sport provides a great balance of ingredients for mineral replenishment and optimal hydration before/during/after your workout. - 10 tablets per tube. Dissolve in 16oz. of water. - These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.

Easy to use and compatible with Presta and Schrader valves, the Twin graph is an intuitive gauge that allows an efficient measure of your tire's pressure. - Fits Presta/Schrader - Accurate up to 160psi - Shows PSI and bar - Weighs only 37g

Wald's 10252 training wheels are designed to mount on most single speed bicycles with 16- to 20-inch wheels and are intended for use by riders weighing up to 100 pounds. These training wheels feature new frame adapters that improve installation. The new frame adapters enable this wheel set to be mounted on bicycles with .75 and 1.00-inch rear frame tubes. The training wheels can also be mounted onto bicycles with 1.25-inch rear frame tubes when the frame adapters are not used.

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

The world’s first CO2 inflator with tire gauge provides tire-inflation and tire-pressure measurement. The angled head fits Presta and Schrader valves and a special feature allows the user to adjust the flow while filling the tire. Dual-end design allows for one-cartridge storage. - CO2 inflator that features a gauge as well - Flow is adjustable using special feature - Compatible with both Presta and Schrader valves - Presta/Schrader with integrated dust cap, Push to inflate - Gauge: Reads 160 psi / 11 bar, 1-1/2” analog - Engineering-grade polymer - Weight: 45g /1.59 oz - Size: 6.5 x 5.2 x 3.3 cm / 2.5” x 2” x 1.3” - Accepts threaded cartridges - CO2 cartridges sold separately

A sturdy handlebar-mounted metal basket for shopping trips, quick jaunts around town. New QuickClick Handlebar Mount (Fixer 3e) allows installation on eBikes to make attachment and removal a breeze. - Capacity: 16L/975 Ci - Weight: 1370G/3.02 Lb - Size: 35x26x25cm/13.8”x10.2”x9.8” - Attachment: QuickClick Handlebar Mount (Fixer 3e) Fits 25.4mm and 31.8mm handlebars (shims included)

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061 T6 alloy construction - To be mounted on bikes with disc brakes - 625g - 55lb weight capacity

A lighter duty version for MTB and commuter use. QR mechanism is secure and easy to use. 7 kg (15 lb) carrying capacity. Compatible with all MTX TrunkBags. Includes hidden storage tray, rubber bungee and safety reflector. - Clamp: Fits 25.4/31.8 mm (shims Incl.) - Bag Compatibility: MTX TurnkBags - Material: Aluminum beam / Plastic cargo deck - Max Weight Capacity: 7 Kilograms - Size: 51 x 12.5 x 9 cm / 20.1” x 4.9” x 3.5” - Weight: 688 grams

Need more carrying capacity for running errands? Then check out Topeak's Rear Basket. It easily attaches to a Topeak QuickTrack rear rack (sold separately) and holds groceries, work clothes and anything else you need to transport. And, its handle makes it extremely portable.

Topeak's MTX TrunkBag DXP boasts a pop-up main compartment and expandable side panniers so it's capable of carrying plenty of gear. Plus it's built to last with rigid molded panels mated to 600-denier nylon. And, it's packed with handy features, such as a shoulder strap, carrying handle, bottle holder, taillight clip and top elastic straps. There are even reflective strips for safety. And, Topeak's ingenious MTX System makes it a snap to attach it to your Topeak MTX QuickTrack rack (sold separately).

MTX QuickTrack compatible TrunkBag featuring a divided main compartment constructed with Topeak's unique process of combining rigid panels and flexible fabric for structure and water repellency. Features two mesh side compartments for extra capacity and rear water bottle holder lets you carry more water on extended trips. - Attachments: 1 divided main compartment, two mesh side pockets - Capacity: 8L / 480 ci - Added Features: Water bottle holder Shoulder strap Carrying handle Elastic top bungees 3M reflective strip Safety light clip Optional rain cover - Size (L x W x H): 35 x 21 x 19 cm / 14.2” x 8.3” x 7.5” - Weight: 870 g / 1.92 lb

Features a construction process that combines rigid molded panels with flexible 600 denier fabric for rigidity and water repellency. Large capacity MTX TrunkBag containing one main divided compartment with two expandable pannier side panels and rear water bottle holder. Our unique construction process provides rigidity and water repellency. Compatible with all MTX QuickTrack® racks with attached side frames. MTX Dual Side Frames are required when using side panniers on MTX BeamRacks. - Insulated main compartment with molded EVA foam sides, top and bottom - Large capacity main compartment with 2 side panels with expandable panniers - Includes shoulder strap and carrying handle - 3M reflective trim - Elastic top bungees - Compatible with the MTX Quicktrack 2.0 System

Epic offroad bike tours require you to bring all the essential tools and gear to keep from being stranded in the middle of nowhere. Designed to employ the unused space in your frame, MidLoader carries the heaviest items for your bike adventure. Constructed of lightweight, highly water-resistant and durable materials, it mounts and removes quickly with hook-and-loop fasteners. Two water-resistant zippered openings provide easy access to all your gear from either side. - Material: Polyethylene / nylon lightweight, durable, water repellent and stain resistant - Bag Attachment: Hook-and-loop fastener - Top Tube Diameter: Fits 45 - 66mm - Down Tube Diameter: Fits 38 - 70mm - Seat Tube Diameter: Fits 28 - 60mm Size - 3L: 37.5 x 12 x 6cm / 14.8" x 4.7" x 2.4" - 4.5L: 46 x 12 x 6cm / 18.1" x 4.7" x 2.4" - 6L: 54.5 x 13.5 x 6cm / 21.5" x 5.3" x 2.4" Weight - 3L: 277g / 9.77oz - 4.5L: 292g / 10.30oz - 6L: 337g / 11.89oz

For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.

A precision fork and shock pump with an easy-to-read dial gauge for accurate pressure readings up to 360 psi / 24.8 bar. An air release button and Pressure-Rite connector makes setting proper pressure easy and eliminates air loss when disconnecting, while the flexible hose takes stress off the valve stem when pumping. - Head: Pressure-Rite shock valve - Guage: 360 psi / 24.8 bar, Analog - Handle: Dual density polymer - Dimensions: 21.5 x 4.5 x 4.3 cm / 8.5" x 1.8 x 1.7" - Volume per stroke: 11cc - Barrel: Aluminum - Pressure Tuning: Air release button - Features: Flexible rotating hose - Weight: 170 g / 5.98 oz

The RedLite 80 BT features 80 lumens and five lighting modes that can be wirelessly controlled via Bluetooth 5.0 by WhiteLite 800 BT or TetraBand BT. Bidirectional tool-free mounting with the included silicone strap for quick installation and removal on aero/round seatposts or seatstays - Battery: Li-Ion - Recharge Type: USB - Lumens: 80 - Lamp: Red COB 3W LED - Battery: 3.7V 1000mAh Lithium Ion (integrated) - Control: 5 modes (High 800 lm - 2.5hrs / Middle 400 lm - 5 hr / Low 200 lm - 9 hr / Blink - 200lm - 20 hr / Pulse 400 lm - 15 hr) - Charge/Charge Time: USB-C / 2 hr - Reserve Time: 0.5 hr - Mount: Strap mount fits aero or round seatposts (25.4 - 34.9mm), seatstay, and Topeak bags - Size: 3.2" x 1.5" x 1.3" - Weight: 51g. - Color: Black

Topeak's Road Morph G is the perfect answer for riders who've had trouble deciding if they want a frame or floor pump. The Road Morph is both! For maximum pumping power, it features a high-volume aluminum barrel, a fold-out base, a long hose with built-in gauge and a T-handle. Of course, it fits Presta and Schrader valves and a frame mount is included, too.

The perfect quick-mount rear rack system attaches to MTB full suspension seatstays or hardtail MTB without rack eyelets. This large rear rack features an innovative top plate that adjusts to level independent of the seatstay angle. Integrated QuickTrack® system allows Topeak TrunkBags / TrunkBox to slide and lock into place and release with the push of a button. Innovative hook and loop strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with KLICKfix® / RackTime® Snapit or Vario system bags. - Strut slot adjustments allow the rack top plate to be level independent of the seatstay angle - Adjustable straps with padded feet securely attach rack to seat stays

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

- Adjustable direct rear mount kickstand - Mounts to 18-40mm kickstand tab - Fully adjustable length for 26" to 29" wheels - Self locking design - Alloy construction

Sunlite's Classic Flower Basket is just like the ones you remember as a kid. Made from weather-resistant plastic, it's tough, light and durable. It fits most handlebars and the flowers are removable. Carry your stuff in style.

Help your young ones learn to ride safely by installing Sunlite Training Wheels on their two-wheelers. These wheels roll smoothly thanks to their heavy-duty plastic construction with hard rubber tires. They fit children's bicycles with wheel sizes of 12 to 16 inches so you can move them from bike to bike as your kids grow!

- Clamp-on mirror made from high-impact, heavy-duty nylon fiber composite - High-quality glass with anti-glare properties provides an extremely clear image - Adjustable head allows fine-tuning of the view angle

• Mounts inside handlebar grips • Optional hand-held use

- USB rechargeable super bright COB style LED light - 8 modes - 4 brightness levels each of both steady and flash - Charging and low battery indicator - Single button interface - quick press to change mode, long press to turn off and double tap to change mode, long press to turn off and double tap to change from steady to flashing - 3 hour charge time - Lumens: 100 - Mount: Rubber strap

• Mounts inside handlebar grips • Optional hand-held use

• Precision-sized, hardened-steel, chrome-plated spoke wrench • Deep U-channels for a great grip • 8-groove design fits 9/10/11/12/13/14/15 gauge spokes/nipples • Made in Taiwan

- Great novelty horn - Fits most handlebars

- Supplies full wheel illumination for 700c/29in wheels and smaller - Approximately 40 hrs of battery life - Water resistant design - Includes 3 (AA) batteries - Sold individually (1 wheel) - Easy to install

Let everyone know your coming with Sunlite's Windmill Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed. And perhaps best of all, for added flair the windmill spins as you ride through the wind!