Accessories

This is the ultimate bike light setup. Trail Evo on the handlebars for that up-close and mid-range fill light, Hangover on your bike helmet that gives a wide but punchy light throw that with their powers combined, creates the Evo Downhill Package. This system together outperforms ANY single high power lamp on the market. More importantly? No wires. No one wants that anymore for their bike lights, let's be real. -Trail Evo bike light for the handlebar with a quick release mount (fits 31.8mm and 35mm bars) -Hangover for bike helmet, with a GoPro mount installed -Customized USB-C to USB-A charging cables -Mounting Location: Handlebar and Helmet -Application: Bike Light package for Trail Riding -Runtime: (see runtime charts) -Charging: USB-C with Pass-Thru Charging (0 to 80% in 3 hours for EVO, 0-80% in 60 minutes for Hangover) -What’s in the Boxes: Trail Evo: Quick-Release Bar Mount (fits 31.8mm and 35mm bars), USB-C to USB-A Charge Cable, 2.5mm Hex Wrench, Instructions -Hangover: Quick-Release Action Camera Mount, Curved Helmet mount with adhesive pad, USB-C to USB-A Charge Cable, Instructions -Lumens: Approximately combined 3000-3100 -Battery Capacity: 3.6V 3500mah (12.6 Wh) for Hangover, 3.6V 10,000mAH (36.0wH) for Trail Evo. -Weight: Evo = 275g + 36g mount, Hangover = 105g + 20g mount

Our first multi-tool includes all the key bits to assemble and disassemble your bike on-the-go. Includes a 15mm and 17mm swappable pedal wrench, 4, 5, 6 and 8mm hex wrenches and a 17mm socket with an integrated storage compartment. The Travel Tool is light and easy to carry, but big enough to allow you to actually tighten everything down properly. Features: - 4mm, 5mm, 6mm, and 8mm hex wrenches - 17mm deep socket - Integrated storage compartment - Pedal Wrench (15mm and 17mm spanners included) - 8-inch Full length arm for proper leverage

The All New NiteRider Lumina Dual 1800 represents the next evolution of our best-selling Lumina headlight into a dual LED set-up that produces a far-reaching beam pattern with extensive peripheral illumination; making it the ideal choice for any riding situation or terrain. The Dual emits an amazing 1800 lumens while in Boost Mode, making it one of the brightest self-contained bicycle lights available today. Simply double tap the power button to set the light to Boost Mode. When in Boost Mode, the power button will illuminate red and blue to notify the user at a glance. The Dual is also equipped with side lighting to increase your visibility day or night. Tested, meeting an IP64 rating; The Dual 1800 is designed to be used in a variety of riding conditions because of its high resistance to water and dust. Its high-strength Dupont Fiberglass reinforced nylon body casing and aluminum heat sink are engineered for extreme resistance to cracking and abrasion. - All New Collimator Lens, distributes a smooth widespread beam pattern - Side lighting for increased visibility day or night - Long lasting 20 hour runtime at 100 lumens in Walk Mode - 5 Light Levels plus 2 Daylight Flash Modes - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Helmet mountable (Helmet Mount sold separately) - Fast 3 hour charge via the included AC power charging adapter - Low battery indicator - Extend your ride time, 6 hour runtime at 350 lumens in Low Mode - Boost Mode indicator, power button will light up red and blue - Boost Mode, double tap power button to unleash maximum LED output at 1800 lumens! - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY - The Lumina Dual 1800 is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - Dual LED Head Light - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - AC Power Charging Adapter

Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series

NiteRider Lumina Max lights light up the night and are daylight visible with Cree LEDs and Max Boost mode. They're high-powered and feature a rugged design made with Dupont fiberglass-reinforced plastic body with integrated aluminum heatsinks. Max series lights feature NiteLink wireless connectivity with the Omega 300 taillight. - NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the headlight and Omega EVO 300 taillight wirelessly. (Taillight sold separately) - Multiple light modes including varying Steady and Safety Flashes - Handlebar mounting (Up to 35mm) with Quick Release Tab for easy light removal - CREE LEDs—the highest-performing LEDs on the market - Compatible with NiteLink Wireless Remote Switch (Sold separately) - Lumens: 1500 - Battery: Li-Ion - Recharge Type: USB

The Swift 300 gives you more than enough lumens at our lightest weight for headlights (82 grams). NiteRider makes this headlight USB rechargeable for convenient on-the-go charging. The Swift 300 features a highly durable light housing with Dupont Fiberglass reinforced nylon meeting all required FL1 Standards for impact testing and water / dust resistance. Vmax+ 150 is NiteRider's first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light-easily clipping onto straps, belt loops, and more. SWIFT 300 FRONT LIGHT FEATURES - Lumen Output: 300 - 5 Modes with Run Times: 2:00 – 28:00h - Charge Time: 2:00h at greater than 500mA | 3:15h at 500mA - Water / Dust Resistant IP64 Rated - USB Rechargeable SWIFT 300 TYPICAL RUN TIMES Low—15:00h at 80 Lumens Med—9:00h at 150 Lumens High—2:00h at 300 Lumens Flash—12:00h at 300 Lumens Walk—28:00h at 20 Lumens Vmax+ 150 TAILLIGHT FEATURES - Lumen Output: 150 - 6 Modes with Run Times: 5:30-27:30h - Charge Time: 2:00h - Water / Dust Resistant IP64 Rated - USB-C Rechargeable Vmax+ 150 TYPICAL RUN TIMES Fast Flash—12:45h Slow Flash—10:15h Disco Flash—10:45h Pulse Flash—7:00h High Steady—5:00h Low Steady—27:00h

The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

Frame Protection Protect your bike against body snatchers, the blob, and those troublesome triffids. Specifically designed to protect your bike's exposed areas against knocks and wear, commonly picked up on the trails and in transit, the seventeen patches can be used independently or in harmony, letting you decide what areas to protect.

- Featuring all five Muc-Off brushes in a handy storage bag - Claw brush ideal for chain, cassette and sprocket - Detailing brush ideal for tight areas such as suspension mounts or fork crowns - Soft washing brush ideal for your bike frame and wheels - Wheel and component brush ideal to clean rim and spokes with ease - Two-prong brush ideal to reach hard-to-shift dirt on your components

Bike Protect is the ultimate liquid bicycle protection. Preserve and freshen your bike with Bike Protect's incredible water dispersing action! It's a perfect 'all over', after-wash corrosion inhibitor due to its extremely high oil content. This increased oil content creates the finest bike protection spray on the market. It drives out moisture and leaves a sparkling, non-sticky protective layer on your frame, drive chain, metal parts, and paintwork. It's ideal to spray onto your chain to drive out moisture before you apply any of the brilliant Muc-Off chain lubes. Bike Protect doesn't just disperse water after you've given your bike a good clean. It also prevents dirt adhesion between washes and reduces future maintenance time as well as helping reduce friction, wear, and energy consumption. - High performance formula leaves dry, non-sticky, protective film - Safe on frame, metal parts, plastics, rubber, paint, and carbon fiber - Drives out excess moisture - Prevents dirt adhesion - Light lubricant coats moving parts - Quick and easy to use - Aerosol Spray - Ideal for Road Cycling, Cyclocross, MTB, & Fat Bikes - Provides the ultimate performance in freezing conditions - For chains, cables, shifters, derailleurs, pedals, & cleats - Incredible durability - Pipette system for easy application

- Creates a ceramic coating for incredible durability and long distance performance - Provides ultra low friction for ultimate drivetrain efficiency - Waterproof qualities excelling in wet conditions - 95% biodegradable

- Highly efficient carbon fiber assembly compound designed to prevent over-tightening and create a secure coupling between surfaces - Carbon Gripper creates friction between carbon fiber clamping areas and lowers clamping torque without causing fatigue or internal fractures or shortening component life

- Incredibly effective cleaning formula containing Nano Technology that also cares for your bike's delicate finishes - Contains no harmful acids, CFC's or solvents and is fully biodegradable - Cuts through dirt, oil and grime quickly and safely leaving your whole bike sparkling clean

The Visor, Lens & Goggle Cleaning Kit is ideal for keeping in your ride pack for quick and safe cleaning on the move. It quickly removes dust, mud, insects, soot and oily residue from your helmet and goggles leaving a streak-free finish. Each kit contains a premium quality microfiber cloth that has been specifically designed to clean delicate finishes. The pack also includes a 35ml spray bottle containing an advanced pH balanced, biodegradable cleaning formula. - EVA storage case included - Contains 35ml Visor, Lens & Goggle Cleaner - Includes Microfiber cloth

- Heavy-duty device that cleans chain in seconds - The kit includes a 75 ml bottle of Drivetrain Cleaner that can be either sprayed over the drivetrain or poured into the top reservoir - Liquid release button ensures the application of the cleaner is quick and easily controlled. - Abrasive cleaning teeth and rotating brush wheels which have 120 contact points cover every part of each chain link for a deep and thorough clean - Excess dirty fluid drops into a second lower reservoir so it’s kept away from the clean chain

- Prevents and stops corrosion on metal surfaces and batteries - Ideal for protecting battery terminals and casings - Resistant to hot, cold and salt water - Use after washing to drive out excess water - Protection lasts up to 3 months

The Mirrycle Jellibell is a fun way to let pedestrians and other riders know you're coming! The Jellibell has a see-through top so you can see the gears spin as it rings. It's weatherproof, too! - Dome Diameter: 48mm (1.9") - Fits handlebars with 21mm – 22.5mm (.83" – .89") outside diameters

Keep valuable handlebar space free with Mirrycle's Incredibell Striker Bell. It integrates into the top cap of the headset, can be mounted any way you choose, and features an adjustable dinger as well. A flick of your finger and the Striker Bell rings loud and clear for all to hear. - Dome Diameter: 45mm (1") - Weight: Black and silver: 36g (1.3oz); Brass: 68g (2.4oz)

The Mirrycle mounts in minutes with the wrench that is included. The mirror is a 3" round, convex glass mirror with a wide field of view. The mirror is adjustable to any viewing angle. - Fits inside handlebars with 13.75mm – 22.5mm (.54" to .875") inside diameter

Break or crack a Mirrycle mirror without ruining the mounting hardware? This replacement mirror is just the ticket! Replacement Mirror Holder with Mirror. Fits on The Mountain, LTD, Original, and Road Mirrycle Mirrors. - Hardware not included

Ride with minimal chain slap by using a Chainstay Protector. Comes in 5 sizes and 4 colors giving you the versatility needed no matter what you ride. Designed and made in our Utah facility, the Chainstay Protector is made with neoprene and sewn with a tight stitch and heavy-duty thread for extra strength and durability. Lizard Skins chainstay guards are the original, strongest and lightest protectors on the market since 1993.

Lezyne's easy-to-use Alloy Drive CO2 is super compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable, and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with 16g threaded cartridges. - CNC machined aluminum dispenser with brass internals - CNC control knob twists for easy and controlled inflation - Twin Slip Chuck head presses on to Presta and Schrader valves - Neoprene sleeve insulates hand from cold during discharge - Compatible with threaded CO2 cartridges - Comes with one 25g cartridge

Lezyne's Flow Cage is made from a fiber reinforced Composite Matrix material for low weight, strength, and reliability. Its X-Grip design holds bottles securely over the rough stuff and allows for easy in/out.

Lezyne's Flow Cage SL is made from a fiber reinforced Composite Matrix material for low weight, strength, and reliability. And, it loads from the side for added convenience — especially on compact frames or full suspension bikes! It is available in both left-side and right-side loading configurations.

Durable, fiber-reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame. - Weight: 48g

Durable, fiber reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame. - Weight: 48g

Lezyne's Flow Cage SL is made from a fiber reinforced Composite Matrix material for low weight, strength, and reliability. And, it loads from the side for added convenience — especially on compact frames or full suspension bikes! The pair comes with one left- and one right-side loading cage.

- Side loading design makes it easy to insert and extract bottles from the side - Low profile design improves compatibility on small/compact frames - Slotted holes for adjustable mounting - Made of composite matrix material

The Macro Drive 1400+ throws out a powerful 1400 lumens of output through our Tri-Focus Optics, creating an optimized beam pattern for superior visibility on the trail or road. Its waterproof USB-C charging port and 2A+ fast charging capability allows for convenient recharging(cable not included), while the CNC-machined aluminum construction with cooling fins ensures durability and efficient heat dissipation. A GoPro mount option and compatibility with the Infinite Light Power Pack+, this front light offers versatile mounting choices and extended battery life. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. Choose from seven different output modes, from the attention-grabbing Daytime Flash Mode to the whopping 300-hour runtime Femto Mode, to suit your lighting needs. A versatile and replaceable strap secures it to a variety of handlebar sizes. - Max 1,400 lumens / 300-hour runtime in Femto mode - Max 1,400 lumens / 300-hour runtime in Femto mode - Waterproof USB-C charging port with charge indicator - 2Amp fast charging - CNC-machined aluminum construction with cooling fins - Tri-Focus Optics are brighter with a large wide-angle pattern - Optional GoPro mount available separately - Infinite Light Power Pack+ Compatible for extended run times - IPX7 Waterproofing standards are Rigorously tested - 5200 mAh battery capacity

Designed with a built-in, discreet holder for an Apple AirTag*, the Matrix Air Cage is a revamped take on our popular Matrix Team Cage. Featuring the same minimalist, dual-side-loading design, it goes one step further by cleanly hiding the AirTag between the bottle cage and bike frame for an added level of security. It's also constructed from the same lightweight, incredibly durable Composite Matrix material and goes one step further with its IPX7 waterproof rating keeping the AirTag dry. By developing it to be virtually indistinguishable from a standard water bottle cage, the Matrix Air Cage is a perfect solution to hide an AirTag and utilize Apple's "FindMy" app to help locate a stolen or missing bicycle. And it's been verified to work with Apple's ultra-wideband signal. Lastly, it comes with a set of stainless steel TR25 security bolts, complete with an included tool bit. -Includes TR25 security bolts and tool. -Ultra-wideband tested. *Apple AirTag not included. *AirTag is a trademark of Apple Inc., registered in the U.S. and other countries and regions.

The Pocket Drive HV is an incredibly compact and lightweight high-volume bike hand pump featuring impressive pumping efficiency for large tire applications, e.g. gravel or mountain bikes. It's constructed from durable CNC-machined aluminum and has a knurled barrel for slip-resistant operation. 90 PSI max.

Engineered for road, mountain, or gravel bikes, the comprehensive Pro Tubeless Kit is the perfect all-in-one tubeless tire repair system. It features a compact, lightweight aluminum housing that cleanly integrates a mix of two different-size tire plugs, a plug insertion tool, a plug retention tool, a valve core remover, a CO2 inflator, and a micro knife. Combined, this offers the simplest, most portable way to seal a tubeless tire across any tire size/type and cleanly remove any excess plug remnants with the included knife for a smooth ride home. Additional/replacement plugs are also available separately. Note: Sealing performance may vary based on puncture size, tire size and tire pressure. PRO TUBELESS KIT: - Stainless Steel Reamer/Inserter Tool - Plug Retention Tool - Stainless Steel Knife - Presta CO2 Inflator - 5x 3.5mm and 5x 1.5mm tire plugs

The Strip Drive Pro Alert 400+ Rear is our most advanced taillight with custom-programmed alert technology. It intelligently adjusts its outputs to signal deceleration and stopping, effectively communicating your actions to traffic and fellow cyclists. The light has ten LEDs and a maximum output of 400 lumens; it is engineered for impressive efficiency and runtime, providing the best beam pattern for optimal light dispersion in even the most challenging conditions. Plus, with an impressive 80-hour max runtime, you can rest assured that this light will last as long as you need it to. Offering seven different output modes, including the highly disruptive Daytime Flash that grabs attention and the wide-angle optics providing an impressive 270° visibility range. It features a lightweight yet durable waterproof construction, rigorously tested to IPX7 Waterproofing standards. A versatile mounting system attaches to aero or round seatposts, and the light also features USB-C waterproof charging(cable not included). Look no further, as this cycling tail light delivers unparalleled visibility-during the day or after dark. Note: This light is not being distributed within the German market. - Max 400 lumens / 80-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Wide Angle Optics: 270° of visibility - Waterproof USB-C charging port with charge indicator - Maximum side visibility design - Multiple mounting options with ladder strap - Lightweight and durable co-molded design - Seven combined solid and flash modes - Fits most seatpost shapes - Rigorously tested to IPX7 Waterproofing standards - 1900 mAh battery capacity

Compact tubeless tire repair kit with machined aluminum storage tube that doubles as a handle. Combined tire reamer and insertion tool. Includes five tire plugs. - Weight: 47g

Peace-of-mind with perfect vision and eye protection, allowing you to enjoy the ride. Our goggles are bulletproof, offering perfect fit and cool looks that won't break the bank. They can take impacts like no other, allowing you to look ahead without fear of the roost or branches. Permanent anti-fog and great designs make these goggles a great choice at a great price. - Bulletproof 170° WideVision Lens - Permanent anti-fog function built into the inner lens - Dual-layer, anti-sweat face foam - Self-draining open lower frame design allows dirt to fall from lens - 40mm anti-slip coated strap - OTG—Over-the-glasses fit - Tear-Off ready with posts - Bulletproof lens tested to: ANSI Z87.1-2015 - Military Ballistic Impact Standard (MIL-DTL-43511D) - Optional lenses available from 22-83% light transmission (VLT) - Certified CE EN 1938 :2010

Kryptonite's Evolution Series 4 1090 Integrated Chain is a 10mm-thick, six-sided link chain made of triple-heat-treated manganese steel for maximum strength. At 35.5-inches long, the Evolution gives you biking security in an easy-to-carry package. The links are covered with a weather-resistant nylon sleeve that protects your bike's finish, and it uses an integrated high-security cylinder that is pick, drill, and cut resistant. Three keys are included, including one that has a high-intensity LED bulb for convenient, easy unlocking in the dark. This chain has an anti-theft protection offer.

Keep your stuff safe with Kryptonite's Gripper Combination Padlock. It sports a steel body and a hardened steel shackle for serious strength and protection.

- 3mm hardened steel links for moderate security lockups - Includes easy-to-install transport bracket - Includes 2 keys - Key Safe Program - Product dimensions: Length 100cm - Product weight: 1.90 lbs

Kryptonite's KryptoLok Series 2 995 Integrated Chain is a 9mm-thick, four-sided link chain made of triple-heat-treated manganese steel for serious strength. Its integrated high-security lock cylinder is pick, drill, and cut resistant. This 37.5-inch chain is covered with a weather-resistant nylon sleeve that protects your bike's finish. Plus, the KryptoLok Series 2 has an anti-theft protection offer.

Big cities call for big protection, and Kryptonite's New York Chain delivers with 12mm six-sided chain links made from hardened manganese steel. Wrap this burly lock around your frame worry-free thanks to the durable nylon cover that protects your bike's paint from scratches. Leave with peace of mind knowing the 14mm hardened Max-Performance steel shackle mated to the Evolution Series 4 Disc Lock is on duty. With a double deadbolt design to protect against twist attacks, would-be thieves don't stand a chance. It comes with three stainless steel keys--one of which is lighted for night access!

Specifications & Features: - 7/10 security rating - 13MM HARDENED MAX-PERFORMANCE STEEL SHACKLE resists bolt cutters and leverage attacks - Patent-pending HARDENED DOUBLE DEADBOLT design gives additional protection against twist attacks - SLIDING DUSTCOVER - DOUBLE DEADBOLT DESIGN - HIGHER SECURITY DISC-STYLE CYLINDER is pick and drill resistant. - Includes FLEXFRAME-U BRACKET providing convenient multi-location u-lock transport - 3 STAINLESS STEEL KEYS — including new key design and one LED REPLACEABLE KEY FOB - Protective vinyl coating - Key Safe Program - Product dimensions: 3.25” x 7” (8.3cm x 17.8cm) - Product weight: 3.55 lbs. (1.61 kgs)

Specifications & Features: - 8/10 security rating - 14mm hardened MAX-PERFORMANCE STEEL SHACKLE - 3 STAINLESS STEEL KEYS — including new key design and one LED REPLACEABLE KEY FOB - Patent-pending HARDENED DOUBLE DEADBOLT design gives additional protection against twist attacks - NEW SMALLER CROSSBAR DESIGN - HIGHER SECURITY DISC-STYLE CYLINDER is pick and drill resistant - Includes FLEXFRAME-U BRACKET providing convenient multi-location u-lock transport - Protective vinyl coating - Key Safe Program - Product dimensions: 4” x 9” (10.2cm x 22.9cm) - Product weight: 3.50 lbs. (1.59kgs)

Constantly improving. Kryptonite's New-U generation of U-Locks features a patent-pending double deadbolt design, anti-rotation capability, sliding dust covers, and an updated, modern design. The KryptoLok has a security rating of 6/10 making it a great choice for quick urban stops or longer suburban stops. Specifications & Features: - 6/10 security rating - 12.7mm hardened PERFORMANCE STEEL SHACKLE - Patent-pending HARDENED DOUBLE DEADBOLT DESIGN gives additional protection against twist attacks - HIGH SECURITY DISC-STYLE CYLINDER is pick and drill resistant - Includes 2 STAINLESS STEEL KEYS, with ergonomic design to reduce the amount of torque, and keep them from bending or breaking - Includes 4’ KRYPTOFLEX DOUBLE LOOPED CABLE for securing front wheel or accessories - Includes FLEXFRAME-U BRACKET providing convenient multi-location u-lock transport - Protective vinyl coating - Key Safe Program - Product dimensions: 4” x 9” (10.2cm x 22.9cm) - Product weight: 3.65 lbs (1.66 kgs)

Kryptonite's New-U New York Fahgettaboudit Mini is simply the strongest lock money can buy. Its 10/10 security rating makes it the best choice for quick stops or overnight security in major metropolitan areas, college campuses...pretty much anywhere! Bike thieves can just Fahgettaboudit. Specifications & Features: - 18mm hardened MAX-PERFORMANCE STEEL SHACKLE - Patent-pending HARDENED DOUBLE DEADBOLT design gives additional protection against twist and cut attacks - Patented STEEL SLEEVE over cross bar for double security - HIGHEST SECURITY DISC-STYLE CYLINDER is pick and drill resistant - Sliding dustcover to PROTECT FROM DIRT AND DEBRIS 3 STAINLESS STEEL KEYS - including new design and one LED REPLACEABLE KEY FOB - Key Safe Program - Protective vinyl coating - Product dimensions: 3.25” x 6” (8.3cm x 15.3cm) - Product weight: 4.55 lbs (2.06 kgs)

The New U, the U-Lock redesign from Kryptonite, features expanded double-deadbolt security, anti-rotation capability, and a fresh new design, all making life quite a bit harder for the bike thieves of the world. The New York Lock Standard is the perfect choice for bike security in major metropolitan areas and college campuses. Specifications and Features: - Security rating: 9/10 - 16mm hardened MAX-PERFORMANCE STEEL SHACKLE - Patent-pending HARDENED DOUBLE DEADBOLT design gives additional protection against twist and cut attacks - HIGHEST SECURITY DISC-STYLE CYLINDER is pick and drill resistant - Sliding dustcover to PROTECT FROM DIRT AND DEBRIS - 3 STAINLESS STEEL KEYS - including new design and one LED REPLACEABLE KEY FOB - Includes FLEXFRAME-U BRACKET providing convenient multi-location u-lock transport - Key Safe Program - Protective vinyl coating - Product dimensions: 4" x 8" (10.2cm x 20.3cm) - Product weight: 4.45 lbs (2.02 kgs)

Kryptonite's Transit FlexFrame U-Bracket makes it easy to carry your U-lock on your bike so it's always handy. This simple mount fits on frame tubes from 25 to 80mm in diameter and it accepts most 13 and 16mm-diameter round-shackle U-locks. Plus, the clamp rotates so you can perfectly align the lock with your bike to keep it tucked out of the way.

- The 2.0 Seat improves on the original Shotgun Seat with the addition of a quick release mount, 2 adjustable leg lengths, and more rubber protection. - Designed for children 2 – 5 years (up to 48lb / 22kg) - Quick release for super fast install, removal and swap between bikes - Adjustable width and angle to fit all mountain bikes (not including e-bikes) - Shotgun 2.0 Bars are 250mm in length, with Pro 19mm rubber grips designed for little hands - Bars come with inserts to fit 25.4mm, 31.8mm and 35mm handlebar diameters - Fits all bikes with standard 1-1/8 steerers (10mm clearance required)

The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The adjustable version allows for a variety of different stem angles. Can be used with positive or negative degree stems and additional spacers can be added (5mm to 10mm) above the stem. Note that some of the larger computers will not always work with a steep angled stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer.

K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatible: Garmin EDGE 820, 520, 510, 500, 25 and 20. - Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system - Fits 31.8MM Handlebars - NOT combo compatible - Weight: 48g - Anodized Color- Black

This sea gem shines on just about any color bike. - Comes with black hook and loop velcro for easy installation and removal. Instructions for installation can be found here. - Keeps your face clean and keeps you smiling longer. - Added wing protection keeps dirt/mud/dust/grime out of your fork seals and stanchions, increasing time between suspension services and extending the life of your fork. - Fits most mountain bike wheel size and fork combinations. Not compatible with reverse arch forks. - Flexible, lightweight and extremely durable polyethylene that's made in the USA from energy-conscious manufacturers using sustainable materials.

This mega chill design pairs well with lo-fi beats and acid-wash jeans. - Comes with black hook and loop velcro for easy installation and removal. - Keeps your face clean and keeps you smiling longer. - Added wing protection keeps dirt/mud/dust/grime out of your fork seals and stanchions, increasing time between suspension services and extending the life of your fork. - Fits most mountain bike wheel size and fork combinations. Not compatible with reverse arch forks. - Flexible, lightweight and extremely durable polyethylene that's made in the USA from energy-conscious manufacturers using sustainable materials.

Keeps your face clean and keeps you smiling longer. - Fits most mountain bike wheel size and fork combinations - Comes with black zip ties for easy installation and removal - Made in the USA

Comes with black hook and loop velcro for easy installation and removal. - Keeps your face clean and keeps you smiling longer. - Added wing protection keeps dirt/mud/dust/grime out of your fork seals and stanchions, increasing time between suspension services and extending the life of your fork. - Fits most mountain bike wheel size and fork combinations. Not compatible with reverse arch forks. - Flexible, lightweight and extremely durable polyethylene that's made in the USA from energy-conscious manufacturers using sustainable materials.

Mid-century modern has finally escaped the living room and gracefully landed in our newest collection, Maze Runner. It’s our classiest design yet, available in three righteous colorways across our fender, frame keeper and topcap lineup. - Comes with black hook and loop velcro for easy installation and removal. - Keeps your face clean and keeps you smiling longer. - Keeps dirt, mud and grime out of your fork seals, which will increase time between fork services and can stretch the life of your shock considerably. - Fits most mountain bike wheel size and fork combinations. - Flexible, lightweight and extremely durable material that's recyclable in most states. - Black plastic backside.

This bad hombre will bring the fiesta to the woods, setting off an all-black bike, or pairing well with a variety of blue, red, orange or green bikes. Frame protection is opaque so frame will not be visible under Frame Keeper. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.

- Comes with black hook and loop velcro for easy installation and removal. - Keeps your face clean and keeps you smiling longer. - Added wing protection keeps dirt/mud/dust/grime out of your fork seals and stanchions, increasing time between suspension services and extending the life of your fork. - Fits most mountain bike wheel size and fork combinations. Not compatible with reverse arch forks. - Flexible, lightweight and extremely durable polyethylene that's made in the USA from energy-conscious manufacturers using sustainable materials.

This one's for the screwups and daydreamers and all the fringe in between. The Space Cadet combines two of our favs - galaxy and camo - for our flightiest design yet! - Comes with black hook and loop velcro for easy installation and removal. - Keeps your face clean and keeps you smiling longer. - Added wing protection keeps dirt/mud/dust/grime out of your fork seals and stanchions, increasing time between suspension services and extending the life of your fork. - Fits most mountain bike wheel size and fork combinations. Not compatible with reverse arch forks. - Flexible, lightweight and extremely durable polyethylene that's made in the USA from energy-conscious manufacturers using sustainable materials.

We combined of our two favorites - space & ferns - for one very galactically lush design! - Comes with black hook and loop velcro for easy installation and removal. - Keeps your face clean and keeps you smiling longer. - Added wing protection keeps dirt/mud/dust/grime out of your fork seals and stanchions, increasing time between suspension services and extending the life of your fork. - Fits most mountain bike wheel size and fork combinations. Not compatible with reverse arch forks. - Flexible, lightweight and extremely durable polyethylene that's made in the USA from energy-conscious manufacturers using sustainable materials.

We combined two of our favorites - space & ferns - for one very galactically lush design! Frame protection is opaque so frame will not be visible under Frame Keeper. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.

Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface