Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Car Racks

Thule T2 Classic - 2 Bike
$499.95
Super rugged platform carrier with frame free clamping security for all types of bikes. - Carrier easily folds when not in use and tilts away from vehicle for rear access due to the HitchSwitch lever - Secure bikes quickly without frame contact with the frame free ratcheting arm - Bike to bike interference is eliminated with fully adjustable bike mounts - Ideal for carbon frames, mountain, downhill, and fat bikes as it fits 20 - 29” wheels and up to 5” tires without adapters - Includes STL (SnugTite Lock) for locking rack to receiver hitch - Carries 2 bikes - Carries up to 4 bikes with Thule T2 Classic Bike Add-on (sold separately, 2” receiver only)
Thule T2 Classic Add-On 9046
$399.95
This add-on to Thule's T2 Classic platform hitch rack allows 4 bike capacity (2"/50mm recievers only). - Secure bikes quickly without frame contact with the frame-free ratcheting arm - Bike-to-bike interference is eliminated with fully adjustable bike mounts - Ideal for carbon frames, mountain, downhill, and fat bikes as it fits 20 - 29” wheels and up to 5” tires without adapters
Saris Bones 2-Bike
$169.99
The arch is arguably the most important engineering feat in human history. One look at Saris’ Bones 2-Bike rack would make any ancient Roman proud. With three incredibly strong, arched leg mounts and two arched arms, you can rest assured that your bike is in solid hands. Six highly adjustable straps, each equipped with soft coated hooks, hold the rack down, while the three legs have grippy rubber feet to provide a sturdy base. Ratcheting anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers.
RockyMounts DriveShaft
$69.95
Secure your through-axle-equipped bike to your fork mount bike rack (sold separately) with RockyMounts' DriveShaft. This adapter allows you to quickly and easily mount a bike with a 15mm or 20mm through-axle fork to your quick-release fork mount rack. It also comes with a lock for peace of mind.
Kuat NV Base 2.0 Add-On
$498.00
When your solo ride turns into a weekend expedition with friends, the NV Base 2.0 Add-On lets you increase the NV Base 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front. - Adjustable front tire cradle system - Fully integrated cable locks - Trail Doc compatible - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - Premium matte powder coat - Compatible with 2-inch NV Base 2.0 - Increases 2-inch NV 2.0 carrying capacity to 4 bicycles weighing up to 40 pounds each - Holds wheelbases up to 48-inch and tires as large as 4.8-inch - Quick change from 2 to 4 bikes
Kuat Transfer Lock Kit
$39.00 - $49.00
Transfer cable lock kit including one locking cable per tray and a matching lock for the hitch pin.
Delta Wheel Hitch Truck Bed Mounted Wheel Holder
$29.99
Delta's Wheel Holder mounts to any flat surface to keep bikes stabilized. - Holds front wheel in place - Rigid steel stays with 9mm dropouts - Mounts to any flat surface
Yakima 1A Raingutter Towers (4-pack)
$219.00
Yakima's 1A Raingutter Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The 1A Raingutter Towers adjust to fit your vehicle's roof line and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
Yakima BaseClip
$63.00
Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
Yakima BlockHead
$39.00
Give your truck bed a permanent bike-mounting solution with this fork-style mount. In fact, this mount, with single-sided adjustment skewer for easy loading, can be installed anywhere you can put a couple bolts. Go ahead, get creative. - A "bolt anywhere" fork-style bike mount - Fits bikes with 9mm x 100mm front hubs - Corrosion-resistant anodized aluminum construction Product Specs: - Weight: 0.50 lbs. - Dimensions: L 4.00 in x W 1.50 in x H 1.87 in - Limited Lifetime Warranty
Yakima Boa Wheelstrap
$7.70
Rear wheel strap for Boa bike mount. Includes one strap.
Yakima Control Key Single SKS
$4.50
The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core. Product Specs: - Weight: 0.02 lbs. - Limited Lifetime Warranty
Yakima CoreBar EndCaps
$4.40
Pair of EndCaps for Yakima CoreBar.
Yakima Corebar
$165.00
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)
Yakima CrossBar Pads
$39.00
Our CrossBar pads combine security and protection with a soft foam core and an anti-slip surface that holds onto your gear. Sectioned hook-and-loop closures are designed to secure around roof rack attachment points and accessories to get a more customized fit for your vehicle. - Foam padding protects boards and boats from damage - Anti-slip material helps keep your gear in place - Sectioned hook-and-loop attachments fit easily around roof rack towers and accessories - Fits most SUPs and fishing kayaks - Fits our CoreBar and JetStream crossbars, factory crossbars, and most other aerodynamic crossbars
Yakima CrossBars
$105.00
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
Yakima Fat Bike QR Locking Skewer
$39.00
A locking QR skewer for Fat Bikes with 9mm x 135mm axles. Includes a locking skewer with sleeve for use with HighSpeed and additional adapters for ForkChop. Product Details - Durable stainless steel axle and body - Easy to adjust end nut and cam lever - Lockable with a SKS lock, sold separately - Includes 9mm x 135mm threaded adapters for Yakima ForkChop - Includes 135mm sleeve for use on Yakima HighSpeed Product Specs - Weight: 1.15 lbs - Dimensions: L 9.50" x W 3.50" x H 1.25"
Yakima FatCat 4 EVO
$249.00
The FatCat EVO is our sleekest, quietest, and sweetest ski & snowboard mount. It is wide enough to carry four pairs of powder skis—up to 136mm at the tip—or two snowboards. FatCat EVO mounts tool-free on virtually any roof rack. SKS locks are built in for added security. For T-Slot crossbars, add the SmarT-Slot Kit 2 for a super-sleek setup (sold separately). - Easily carries four pair of skis—up to 136 mm wide at the tip—or two snowboards - Aerodynamic design delivers a quiet ride and streamlined good looks - Universal mounting system works with round, square, factory, and most aerodynamic roof racks - Integrated SkiLift provides clearance for tall bindings - DoubleJoint hinge expands for easy use with thick skis and boards - Large button makes it easy to open with gloves or mittens on - Sleek mirror-black finish looks great on your roof - Integrated SKS (Same Key System) locks included - Compatible with T-slot crossbars—just add our SmarT-Slot Kit 2 (sold separately) Product Specs: - Weight: 10.00 lbs. - Dimensions: L 30.50 in x W 3.75 in x H 5.25 in - Minimum Crossbar Spread 12.00in - Maximum Crossbar Spread 36.00in - Limited Lifetime Warranty
Yakima Fork Adapter
$59.00
This fork adapter allows you to put your thru-axle fork on any 9mm fork-mounted bike rack. - Axle not included. Works with your bike's thru-axle - Fits all fork bike mounts including, Yakima, Thule, Rocky Mounts, etc. - Built-in safety tabs - Durable black powder-coat finish Product Specs: - Weight: 0.32 – 0.38 lbs. - Minimum Crossbar Spread 16in - Maximum Crossbar Spread 42in - Limited Lifetime Warranty
Yakima GateKeeper
$169.00
The GateKeeper tailgate pad is a perfect companion for pick-up bed bike transport. The durable nylon exterior protects your bike from your truck’s tailgate while the soft felt backing keeps your truck’s paint protected. Integrated SitTight bike cradles add extra stability and protection for your bikes and the HindSight tuck-away cover opens up the view for your back-up camera, leaving you with a worry free shuttle to the top. - Tailgate pad for your truck that securely carries your bikes to the trailhead - NEW Cushioned SitTight cradles protect bikes from shifting and sliding - NEW HindSight cover tucks out of the way so your back-up camera can do its job - NEW Velcro cradle closure system is easy on carbon bike frames and painted surfaces - Rugged nylon outer material resists abrasion and weather damage - Extra soft felt backing protects your truck’s paint job - Integrated strap management system keeps the pad tight and secure on the way up the mountain - Medium size has a 5 bike capacity and fits mid-size & some older full-size trucks - Large size has a 6 bike capacity and fits most full-size trucks - Medium Dimensions: 53-inch Long x 5-inch Wide x 17-inch Tall - Large Dimensions: 62-inch Long x 7-inch Wide x 20-inch Tall
Yakima HD Bar
$249.00
Our burliest crossbar ever, the HD Bar is the one for heavy loads, rugged terrain and maximum utility. It delivers the muscle our new truck racks demand, and works with our StreamLine towers to get the heavy-duty job done right. The engineered aluminum construction provides superior support without weighing things down, integrated tie-down points to simplify load security, and T-slot attachment technology for adding gear mounts the fast, easy way. The Yakima Way. Product Details: - Strong, lightweight aluminum construction handles heavy loads great for rooftop tents - Integrated tie-down points on endcaps make it easy to secure gear - T-slots top and bottom to easily add Yakima and compatible gear mounts - Includes rubber infill for top T-slot for load protection and wind noise reduction - Built to last and look good doing it with a durable black powder-coat finish - Compatible with all StreamLine towers with our new HD Bar SL Adapter (sold separately #8003541) - Available in variety of lengths 55"/60"/68"/78" to create custom set-ups Dimensions: - Small = 9.61 lbs, L 55.00in x W 3.00in x H 1.50in - Medium = 10.68 lbs, Dimensions: L 60.00in x W 3.00in x H 1.50in - Large= 11.65 lbs, Dimensions: L 68.00in x W 3.00in x H 1.50in - X-Large= 12.00 lbs, Dimensions: L 78.00in x W 3.00in x H 1.50in
Yakima HighRoad
$249.00
Secure, sleek, and simple to use, the HighRoad is Yakima's newest premium upright bike mount. The adjustment-free hoop, with its TorqueRight tightening knob, loads a variety of bikes quickly and easily. The HighRoad secures the bike by the wheels for ultimate bike protection and the low-profile design minimizes hatch interference. Universal mounting hardware fits most roof racks. - New wheel hoop fits 26" to 29" wheels and tires from 23mm to 4.0" with no adjustment needed - New integrated TorqueRight knob quickly and easily secures the bike with precision - Requires no wheel removal and makes no contact with the bike frame—a great option for carbon fiber bikes and custom paint jobs - Sleek, low-profile tray minimizes hatch interference - Tool-free, universal mounting hardware fits most roof racks - Add your own bike lock to the integrated lock loop for additional bike security when your vehicle is parked - Easily convert to integrate with T-Slot crossbars with the addition of a SmarT-Slot Kit - Add SKS Locks (2) to the included TailWhip cable to secure your bike and mount to your roof rack (sold separately) - Accommodates bike wheelbases up to 48" Product Specs: - Weight: 18.00 lbs. - Dimensions: L 56.00 in x W 9.50 in x H 4.50 in - Minimum Crossbar Spread 18.00in - Maximum Crossbar Spread 36.00in - Limited Lifetime Warranty
Yakima Holdup Wheelstrap
$8.70
Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.
Yakima Jetstream Bar
$219.00
Step up to the completely new Yakima bar. Thoroughly wind-tunnel tested, the black JetStream's JetFlow design is exceptionally aerodynamic, incredibly strong, lightweight, and really quiet on the move. The root of a modern rack system, it carries a lot and looks good doing it. Shopping for a full Yakima Roof Rack System? Use our Fit My Car tool to get outfitted with everything you need for a Base Rack System. - Comes with 2 Crossbars and 4 Endcaps - Wind-tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Seamless extruded aluminum construction is light, strong and sleek - JetTruss internal support engineering adds serious strength for minimal weight - T-slot with SmartFill push-down infill for easy mount attachment and efficient airflow - Clear anodized alloy finish and high-gloss polymer end caps look awesome on your roof - Streamline crossbars are compatible with any StreamLine Tower - Need an adapter? Mighty Mount 39H will let you mount round and square bar accessories on your JetStreams - Find the right bar style and length to fit your needs - Compare four crossbar styles and features to learn more
Yakima Landing Pad
$63.00 - $126.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
Yakima Landing Pad 23
$126.00
Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2015 - 2019 Subaru Outback. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market - Complete set of 4 Landing Pads with no additional tools required - 33" crossbar spread allows most Yakima gear mounts - Snap-on covers to keep the elements out while the rack is removed - Weight: 1.35 lbs - Dimensions: L 5.50 in x W 1.50 in x H 2.75 in
Yakima Landing Pad 27
$126.00
Custom Landing Pads to install directly to the factory mounting points on raised rails of the 2020+ Subaru Outback. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs: - Weight: 0.60 lbs. - Limited Lifetime Warranty
Yakima LongArm
$229.00
The LongArm truck bed extender easily extends the length of any truck bed up to 4 feet. Light and strong, the aluminum hitch-mounted rack is the ideal solution for hauling fishing kayaks, boards, lumber, ladders and more. Adjustable to three distinct load-carrying positions and rated to carry up to 300 pounds in lower positions, the LongArm takes your truck bed to the next level. - Provides 4 feet of additional truck bed length with a 60" wide crossbar - Adjustable to three load-carrying positions: - Bed height for use when your truck tailgate is open (300 lb carrying capacity) - Bed rail height for use with our BedRock rack system or a tonneau cover (300 lb carrying capacity) - Truck cab height by combining the LongArm Extension with a roof rack system (165 lb carrying capacity ) (sold separately) - Installs easily and securely to any 2" hitch receiver using the included 5/8" threaded hitch bolt - Aluminum construction engineered for strength – weighs only 12 lbs! - Integrated tie-down points ensure a secure ride for your fishing kayak, canoe, ladders, lumber and more - Add any Yakima boat mount to the crossbar for added boat protection. - Yakima signature bottle opener lets you enjoy a post-paddle cold one - Durable black powder-coat finish - Add the LongArm Pad for increased load protection (sold separately) - Add the LongArm Height Extension up to cab height (sold separately). - Heights from the top of the tongue to the top of the crossbar at the four angle positions (Vertical to Horizontal): - Low Bar Heights—40 in, 37 in, 27 1/2 in, 14 1/4 in - Mid Bar Heights- 41 3/8 in, 38 1/4 in, 28 in, 15 1/4 in - High Bar Heights- 42 3/4 in, 39 1/2 in, 29 in, 15 3/4 in Product Specs: - Weight: 13.00 lbs. - Dimensions: L 18.00 in x W 60.50 in x H 43.00 in - Limited Lifetime Warranty
Yakima Outdoorsman 300
$239.00
The versatile, no-drill Outdoorsman lets you create a top-of-vehicle truck rack system for your full-size pickup truck—without the need for a camper shell—while leaving you full access to the truck bed. - Clamps onto truck bed rails without any drilling - The perfect rack solution for everyday hauling of ladders and lumber - Heavy-duty construction handles up to 300 lbs - Sold in pairs; combine single pair with racks on truck roof or combine two pairs for complete system Product Specs: - Weight: 25.00 lbs. - Dimensions: L 16.00 in x W 2.00 in x H 29.00 in - Limited Lifetime Warranty
Yakima Q Clip
$50.00
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Yakima Q-Towers
$119.00 - $209.00
The proven Yakima tower for cars with nothing up top, the Q Towers pair with Q Clips to turn a naked roof vehicle into a versatile pile-it-on hauling machine. Durable, simple to install, and super-secure, these work with our RoundBars to get you where you want to go. - Secure, easy-to-use tower specifically designed for cars without roof rails or gutters - Works with the classic Yakima RoundBar - Four-way movement delivers a more solid fit - Padded base aids grip and helps preserve your paint job - Fast and easy tool-free installation and removal - Easily locks to you vehicle with our SKS system (sold separately) Product Specs: - Weight: 3.97 lbs./Pair - Dimensions: L 5.50 in x W 2.50 in x H 5.50 in - Limited Lifetime Warranty
Yakima RidgeClip
$126.00
Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system
Yakima Roundbar SL Adapter
$30.00
With more than a quarter century of real-world testing, Yakima's iconic round bar is proven across a range of adventures and under a variety of loads. Strong, utilitarian and easy to use—this classic is a classic for a reason. Bar adapter that allows you to run RoundBar on StreamLine Towers. - Adapter required to use RoundBars with the New StreamLine Towers. Sold in a set of four. - Includes 4 RoundBar end caps Product Specs: - Weight: 0.42 lbs. - Dimensions: L 2.00 in x W 2.00 in x H 1.00 in - Limited Lifetime Warranty
Yakima SKS Lock Cores (2-Pack)
$40.00
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 2 SKS Cores and matching keys - 2 keys included plus a control key
Yakima SKS Lock Cores (4-Pack)
$60.00
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 4 SKS Cores and matching keys - 2 keys included plus a control key
Yakima SKS Lock Cores (6-Pack)
$80.00
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 6 SKS Cores and matching keys - 2 keys included plus a control key
Yakima SKS Lock Cores (8-Pack)
$100.00
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 8 SKS Cores and matching keys - 2 keys included plus a control key
Yakima Thru-Axle Adapter (WheelHouse)
$15.00
Thru-axle adapter works with WheelHouse to hold wheels with 12mm and 15mm thru-axle. - Easy cam lever for quick installation - Durable stainless steel skewer - Up to 110mm front hubs Product Specs: - Weight: 0.44 lbs. - Dimensions: L 9.00 in x W 0.75 in x H 2.00 in - Limited Lifetime Warranty
Yakima Windshield
$125.00
A smart fairing that easily attaches to any Yakima bar—and just about anyone else’s—to quiet wind noise and reduce drag. - Moves airflow up and over the rack to reduce drag and quiet wind noise - Band-style attachment quickly and easily attaches to any crossbar - Secures with easy-to-reach adjustments and included tool
Thule Accessory Strap Kit
$19.95
Thule's Accessory Strap Kit is a set of four rubberized, replaceable, ladder-style straps for use with many of Thule's bike racks and anti-sway cradles.
Thule Adapter Kit - Xadapt 2
$19.95
The Thule Xadapt 2 Adapter Kit makes it possible to connect Thule carriers to Thule Rapid or Xsporter load bars. Please contact us with any questions regarding compatibility.
Thule Adapter Kit - Xadapt 3
$14.95
The Thule Xadapt 3 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.
Thule Adapter Kit - Xadapt 8
$14.95
The Thule Xadapt 8 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.
Thule Adapter Kit - Xadapt 9
$14.95
The Thule Xadapt 9 Adapter Kit makes it possible to connect Thule carriers to Thule Rapid Aero and Thule Professional load bars. Please contact us with any questions regarding compatibility.
Thule AeroBlade Edge (Flush Mount)
$249.95
Thule's AeroBlade Edge (Flush Mount) is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles without a factory rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. These flush-mount feet will need a fit kit for your specific vehicle (sold separately).
Thule AeroBlade Edge (Raised Rail)
$249.95
Thule's AeroBlade Edge is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles with a factory roof rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The feet fit your vehicle's roof rails without a fit kit and they're T-track compatible as well.
Thule AeroBlade Load Bar
$199.95
Thule's AeroBlade Load Bars are the strong, silent type. Using a sophisticated BoxBeam construction, they're some of the strongest load bars on the market with a capacity of up to 165 pounds. That's the strong, now for the silent: In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The bars are easy to use, too, thanks to Thule's SmartSlide sytem that makes installation hassle free and their SwingBlade technology that allows full access to the T-slot for easy accessory additions.
Thule AirScreen XT
$129.95
Wind fairing that redirects airflow over the roof rack for a quieter ride. - Attaches to Thule WingBar Evo, WingBar Edge, AeroBlade, AeroBlade Edge, and SquareBar Evo with included hardware - Around the bar tool-free mounting allows for quick T-track access - Clip-on design requires no tools for assembly or installation
Thule Airscreen - 32-inch
$129.95
Wind fairing that redirects airflow over roof rack for a quieter ride. - No tools required for assembly or installation. - New system-specific clamps (included) provide the roof rack fairing a clean and secure mounting for our - AeroBlade, AeroBlade Edge and SquareBar systems. - AeroBlade and AeroBlade Edge clamps give full access to the upper T-track for quick accessory mounting and removal. Technical specifications - Length: 32-inch - Fits Thule AeroBlade - Fits Thule SquareBar
Thule Artificial Rain Gutters
$74.95
The Artificial Rain Gutters from Thule let you attach any of their classic cargo racks (sold separately) to vehicles that lack integrated rain gutters. These are most commonly installed on camper tops, pickup truck caps, and Jeep Wrangler tops. This set includes four Artificial Rain Gutters and rubber gaskets to protect your car's finish.
Thule Cradle Ratchet Strap Kit
$29.95
Replacement ratcheting cradle straps (for 2 bikes). - Replaces ratchet style straps on Thule Apex XT, Thule Helium Pro, Thule Camber, and Thule Range - Contains six ratchet style straps (four cradle straps and two anti-sway)
Thule DockGrip Kayak Saddle
$249.95
A versatile, horizontal kayak carrier with large cushioned, flexible pads that conform to a large range of hull shapes as well as SUPs. - Protects the hull with large, flexible, cushioned pads - Fits a variety of Thule rack systems, round bars and most factory racks due to T-Track and FlipFit brackets - Accommodates kayaks and SUPs up to 36 in/90 cm wide and 85 lbs/40 kg - Easily secure the kayak or SUP using the center load straps with car-protective buckle bumpers and QuickDraw bow and stern tie-downs - Can carry a variety of hull shapes as well as SUPs with two independent pivoting saddles with angle-setting lever
Thule EasyFold XT
$799.95
Thule’s EasyFold XT is a fully foldable, compact, and easy-to-use hitch-mounted bike rack for all types of bikes. - Easy mounting of bikes through detachable bike arms with lockable - Thule AcuTight torque limiter knobs that “click” when optimal torque is reached - Fully foldable for convenient mounting, handling, and storage - Wheel straps with adjustable pump buckles for fastening wheels. (Optional XXL Wheel Strap kit to fit longer wheelbases and tires up to 4.7") - High load capacity enabling transport of e-bikes and heavy mountain bikes - Easy trunk access even with bikes mounted, thanks to smart foot pedal tilt - Foldable bike loading ramp integrates into rack for convenient storage (included) - Large distance between wheel holders enabling transport of sturdy bikes with large wheel bases - Ergonomic transport of the bike rack thanks to the integrated carrying handles - Lock your bikes to the bike rack and your bike rack to the receiver (locks included) - Thule Snug-Tite receiver lock virtually eliminates hitch rack movement in receiver and locks the hitch rack to the vehicle
Thule Evo Flush
$219.95
Easy-to-install foot for Thule Evo roof racks, for vehicles with flush railings. Features - Load carrier feet for Thule Evo roof rack system - Foot installs easily onto vehicles with flush railings - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Secures to vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer's Guide to find out which roof rack fits your car Technical specifications - Maximum load: 165-pound. Please also check the maximum roof load capacity of your vehicle - One Key System compatible Fits: - Thule WingBar Evo - Thule AeroBlade - Thule SquareBar - Thule ProBar
Thule Fat Tire Kit for T2 Racks
$59.95
With Thule's Fat Tire Kit for T2 Racks you can finally throw your fat bike on your Thule rack (sold separately) and head for the hills. Oversize wheel trays accommodate tires up to 5-inches wide and the tray has been shaped to work perfectly with even the widest treads. An extra-long wheel strap is included to make fastening your rear wheel a breeze. This kit attaches easily to your Thule T2 hitch rack (sold separately) and includes the mounts needed for a single bike.
Thule Fit Kit 5143
$129.95
Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points or factory-installed racks. Features - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Check the Thule Buyer's Guide to find out which fit kit fits your car Fits Cars CHEVROLET - Spark 5-dr Hatchback with Normal Roof 2013 - 2015 - Spark 5-dr Hatchback with Normal Roof 2016 - 2020
Thule Fit Kit Kit4072
$119.95
Fitting kit required for perfect fit of the roof rack to a specific car.
Thule Foot Locking Strap
$89.95
Two 13-foot or 10-foot locking straps with One Key locking cylinders. - Two locking straps - Steel cables inside a theft-resistant nylon sleeve provide a dual-layer locking system - Lightweight and corrosion resistant aluminum buckle - Lock housing rubber-coated to prevent vehicle and equipment scratches - Two One-Key lock cylinders included
Thule Front Wheel Holder
$79.95
Secure and easy-to-use roof-mounted front wheel holder keeps muddy and bulky wheel out of the trunk. - Fits quick-release wheels out of the box and thru-axle wheels with adapter accessory - Fits all wheels from 20" up to 29" and tire size up to 3" - Fits 9mm quick-release bikes - Fits 12-20mm thru-axle bikes with adapter accessory (adapter sold as an accessory) - Holder arm can be separated from the base for convenient loading of the front wheel off the car - Holder arm with the wheel installed easily docks to the base - Locks the front wheel to the holder and the holder to the roof rack (locks included) - Ability to fold flat when not in use - Fits most roof racks up to 90mm by around-the-bar solution including Thule SquareBar roof rack with included adapter
Thule Front Wheel Holder TA Adapter
$19.95
An adapter for Thule Front Wheel Holder to enable transport of bikes with 12-15mm thru-axles. - Enables transportation of wheels with 12-15 mm thru-axle forks
Page 1 of 4 Next page