12- to 24-Inch

OS20 diameter BMX race tires designed to balance traction and low rolling resistance with a block-designed center tread. - CYLEX 120 TPI superlight casing - UTC rubber compound - Patterned sidewall adds abrasion protection while maintaining casing suppleness - OS20 utilizes a larger diameter tire design to increase rolling efficiency Compatibility: - Must use with specific OS20 frames and rims, however many forks will accept this tire sizing currently - ISO Diameter = 451mm - NOT compatible with standard 20-inch BMX rims (ISO Diameter = 406mm)

• Entry-level BMX-style tire with sturdy casing for longevity • Wire bead

• Urban tire with raised center for reduced rolling resistance • Size: 20 x 1 3/4 • ISO 419

- Chilled on wild tricks and steep ramps. - The wraparound tread has great grip in half-pipes. - Special strengthening protects the sidewalls. - -02 & -03: E-50 E-Bike Certified

Schwalbe's Marathon Plus is legendary for durability and protection. Their nearly impenetrable 5mm-thick SmartGuard layer almost eliminates flats over the course of the tire's excellent, long life. Whether you're setting out on a cross-country bike tour, cruising on a tandem, or just want peace of mind during your daily commute, the Marathon Supreme is in it for the long haul.

A collaboration between Vee Tire and SE Bikes, the Cub tire features a classic BMX tread pattern blended with that bold SE styling. The square V-knobbies have been strategically placed for ultimate grip and traction. - 20 x 2.0" - Wire bead

Primo tires designed for wheelchairs. - Gray tires for wheelchair - ISO diameter = 540mm - 75psi

A classic knobby version of the Aitken signature tire. Traditionally a more dirt-specific tire but the tire’s fast rolling center tread allows it to be used on all terrains. - 20 × 2.35 only Single ply casing

Dirt-to-pavement versatility - BMX, urban assault, or dirt jump - Inverted knob design The Holy Roller is one of those "set-it-and-forget-it" tires. Mount up a pair of Holy Rollers on your BMX or DJ bike and you'll be ready for the next session no matter where it's happening—dirt, street, or park.

Dirt-to-pavement versatility - BMX, urban assault, or dirt jump - Inverted knob design The Holy Roller is one of those "set-it-and-forget-it" tires. Mount up a pair of Holy Rollers on your BMX or DJ bike and you'll be ready for the next session no matter where it's happening—dirt, street, or park.

The standard by which all tires are judged - Large cornering blocks - Ramped, directional tread design - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With a tread design that deftly balances rolling speed with braking and cornering traction, it's hard to find fault with the Minion DHF. That's probably why it's one of the most imitated tires in mountain biking. Whether riding local trails, a backcountry epic, racing enduro, or World Cup downhill, there's a Minion DHF spec to meet your needs.

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

The Rekon is an aggressive trail tire inspired by the Ikon - Designed for aggressive XC trails - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Rekon is an aggressive trail tire inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking, and L-shaped side knobs ensure support when carving loose turns. With confidence like this, you can race more and scout less with the Rekon.

Basic tires can still offer a great ride. Giant's Comp III tires feature knobby tread for off-road action and a durable rubber compound.

Basic tires can still offer a great ride. Giant's Comp III tires feature knobby tread for off-road action and a durable rubber compound.

The Williams tire combines the best of both worlds, with a smooth continuous centerline tread that rolls super-fast and super grippy micro-knurling across the side treads. The 2.5" width adds stability and softens hard landings, while still fitting in most modern frames. Nathan Williams tested and approved. - Size: 2.5" - Pressure: 35-60 PSI - Bead: Wire - Weight: 23.8 oz

Born in BMX racing competition, Speed Booster is designed to meet the demands of lighter weight, better stability when cornering, good rolling resistance at high speed and grippy contact to the track, thanks to new developed LSG+ compound that is used exclusively for the Speed Booster. - Folding bead BMX race tire - LSG+ compound: Based on Vee's roadbike compound with 66 hardness now applied for BMX racing with great rolling resistance for hard pack circuit but at the same time holds grip from start, with fast cornering

The Speedster is a high performance race and dirt jump tire designed for speed and minimal drag on hard packed or paved terrain in wet or dry conditions. - Honeycomb center tread provides added traction and increased speed with very low rolling resistance; large diamond shaped side knobs give extra grip and cornering control - Large diamond shaped side knobs give extra grip and cornering control - Low Specific Gravity Compound is lightweight and designed for high speed

- Fast rolling on hardpack and paved terrain - Honeycomb center tread has minimal rolling resistance and long tread life - Diamond shaped side knobs offer great cornering grip - Low Specific Gravity (LSG) rubber compound

A highly versatile front and rear race tire option that strikes a balance between speed and control with Tioga's GripPod technology and Nano Knob tread design - CYLEX 120 TPI ultralight casing - PneuMax 110 PSI high-pressure inner coating - AvntGUARD cut protection membrane - UTC rubber compound - Grip-Pod system helps maintain traction when cornering - Chemical etching on center tread creates a fine texture for enhanced traction

A tire designed specifically to reduce drag with a center band of uninterrupted tread. - Front tire specific design - UTC rubber compound - Patterned sidewall adds abrasion protection while maintaining casing suppleness

The SPECTR is a versatile tire that can handle street, wood, cement, or dirt. A smooth center tread keeps the tire rolling fast while the GripPods on the shoulder provide additional traction when carving. - PneuMax 100 PSI casing - UTC rubber compound - Grip-Pod system helps maintain traction when cornering

• BMX tire with deep knobs for traction

• BMX tire with medium knobs for traction

- Slick center tread with continuous curved lines on each side of the outer tread surface - Perfect for old-school rides such as the Schwinn Stingray or new BMX bikes with a knack for old-school vibes

• Balloon tire with grooved tread • Large air volume for added shock absorption • Wire bead • Size: 20 x 2.125

• Balloon tire with grooved tread • Large air volume for added shock absorption • Wire bead • Size: 24 x 2.125

• Cruiser tire with beveled diamond-shaped tread for traction • Flame design • Wire bead • Size: 24 x 3.0

• Street/vert tire with bead-to-bead, siped, lightly grooved tread • Wire bead • Size: 20 x 1.95

• Street/vert tire with bead-to-bead, siped, lightly grooved tread • Wire bead • Size: 24 x 2.4