Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Lubes/Cleaners

$106.00
RockShox Dynamic Seal Grease - Recommended for rear shock service
$5.20
- Makes braking and shifting super smooth by reducing the drag in cable housings - Law prohibits ORM-D materials from shipping by air
$6.50
Rock-N-Roll Absolute Dry lubricant is a super-clean chain lube that picks up little or no dirt. - For road bikes only
$7.00
- Premium white grease - Great for bearings and overhauls
$8.42
- Premium greyish-black grease - Great for suspension pivots, seatposts, joints, etc
$8.50 - $18.50
Rock-N-Roll Extreme is a very clean lubricant due to its ability to shed dirt and dust. - For mountain bike or wet road riding
$8.95
Rock-N-Roll Gold lubricant is for both mountain and road bike use. The formulation goes deep down into the chain and traps any dirt. Then, with the energy of the chain freewheeling backwards, the dirt and grit floats to the surface so you can wipe it all off, leaving a new and clean application of lube inside the chain, where it's needed. - All-purpose lube - Cleans and lubricates simultaneously
$9.00
- 3-In-1 Bio-degreaser, hand cleaner, and stain remover - 100% Natural, no citrus, palmas or petroleum
$15.95 - $19.95
Prestacycle One is a complete Lubrication and Cleaning product for your Bicycle. It is Bio-based and USDA Certified. As a lubricant, it is so good it broke the ASTM 4 Ball Wear test. As a cleaner, degreaser and corrosion protectant, it provides the ultimate in bicycle care, all in one environmentally friendly package. Uses: - Dry Lube - Wet Lube - Bike Wash - Degreaser - Rust Remover - Rust Preventer - Anti-Seize - Paint Protectant - Metal Polish - Leather Conditioner Performance: - Substantially reduces friction improving pedaling, shifting and drive train performance - Sheds water - Clean, Lube and Protect with one product - Improved lubrication and wear resistance even when run dry - Temperature performance range from -48F to +600F - Extends chain life - Seasons chains and cables after 3-4 applications - State of the art penetrating characteristics - Road, Track, Gravel, CX, MTB, BMX & eBike - Motorcycles - Skateboards Technical: - State of the art Sub-Micron formulation enables the product to be run wet or dry for all riding conditions - Not vegetable oil or vegetable ester based. Will not dry out or gum up - No thermal decomposition even in extreme riding conditions - No Petroleum - No Alcohol Environmental: - Green Engineered - Bio-based Product - Non-Toxic - Biodegradable - USDA Certified - Made in the USA with USA raw ingredients Meets or Exceeds: - MIL-PRF-6340E ASTM D93 Flash Point - MIL-PRF-6340E ASTM D445 Kinematic Viscosity 104 F - MIL-PRF-6340E ASTM D4172 Wear Preventative Characteristics - MIL-PRF-6340E ASTM D5620 Load Carrying Capacity Jaw Load - MIL-PRF-6340E ASTM Corrosion Production - ASTM D 5183, Determination of the Coefficient of Friction for Lubricants: No Fail
$16.95
Uses: - Bearing Grease - "Wax" (application style) Lube - Bike Wash - Degreaser - Rust Remover - Rust Preventer - Anti-Seize - Paint Protectant - Metal Polish - Leather Conditioner Performance: - Substantially reduces friction improving pedaling, shifting and drive train performance - Sheds water - Clean, Lube and Protect with one product - Improved lubrication and wear resistance even when run dry - Temperature performance range from -48F to +600F - Seasons chains and cables after 3-4 applications - State of the art penetrating characteristics - Road, Track, Gravel, CX, MTB, BMX & eBike - Motorcycles - Skateboards Technical: - State of the art Sub-Micron formulation enables the product to be run wet or dry for all riding conditions - Not vegetable oil or vegetable ester based. Will not dry out or gum up - No thermal decomposition even in extreme riding conditions - No Petroleum - No Alcohol Environmental: - Green Engineered - Bio-based Product - Non-Toxic - Biodegradable - USDA Certified - Made in the USA with USA raw ingredients Meets or Exceeds: - MIL-PRF-6340E ASTM D93 Flash Point - MIL-PRF-6340E ASTM D445 Kinematic Viscosity 104 F - MIL-PRF-6340E ASTM D4172 Wear Preventative Characteristics - MIL-PRF-6340E ASTM D5620 Load Carrying Capacity Jaw Load - MIL-PRF-6340E ASTM Corrosion Production - ASTM D 5183, Determination of the Coefficient of Friction for Lubricants: No Fail
$10.75
- 100% Natural and biodegradable, Without animal products - Apply a small amount, Work in, Then rinse off with water - Leaves skin clean with a subtle forest scent
$13.00
Our Bio-Lube is a lighter lubricant than our Tenacious Oil. Bio-Lube is made using all-natural ingredients and works as a fair-weather lubricant, as well as an all-purpose household lubricant. It is environmentally friendly, non-toxic, and completely biodegradable. - Bio-Lube is made using all-natural ingredients and works as a fair-weather lubricant, as well as an all-purpose household lubricant - Bio-Lube is a lighter lubricant than our Tenacious Oil - Environmentally friendly, non-toxic, and completely biodegradable
$13.00
Our Tenacious Oil is used for ultimate protection and durability for components that have movement with metal-to-metal contact. Our base oil has been produced for us by the same independent California refinery since 1971. The final blending of rust inhibitors and extreme wear additives happens at our facility before the product is bottled and shipped. - Ultimate protection and durability for metal-metal contact - Base oil with rust inhibitors and anti-wear additives
$13.00
- Prevents rust, repels water - Extra heavy duty, nothing finer - Has achieved the Premium lubricant classification by all major bearing manufacturers worldwide
$9.95
Park's Anti-Seize Compound reduces friction in threaded and press fit connections for easy assembly and disassembly. It's ideal for bottom brackets, pedal threads, headset cups, seatposts, quill stems and much more. This compound also seals and protects parts from corrosion and rust under the most extreme conditions.
$9.95
Regular lubrication of bicycle chains addresses annoying squeaks and noises, and extends the life of the chain and drivetrain components. Formulated using a proprietary blend of oils, Park Tool CL-1.2 Chain Lube works great in wet or dry conditions. It penetrates, reduces friction, prolongs component life, displaces moisture, and protects parts from rust and corrosion. Compatible with all bicycle chains. Also works great as general-purpose light lubricant for use on bicycle brake and derailleur cables and housing, spoke nipples, and derailleur and brake pivots. - 4 fl. oz. (118 mL) bottle NOTE: Some painted surfaces can be sensitive to oil and grease. Clean off any excess oil or grease immediately. Test first on an inconspicuous area to see if it causes a stain or discoloration.
$9.95
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.
$9.95
Keep your chain running smoothly with Park's Synthetic-Blend Chain Lube. It uses PTFE and a proprietary blend of oils to penetrate, reduce friction, prolong chain life, displace moisture and protect chains from rust and corrosion. Plus, it works great on cables, spokes, and derailleur and brake pivots, too.
$12.95
Park's SuperGrip Carbon Assembly Compound is a combination of grease and tiny particles and is ideal for lubricating, protecting and tightening carbon components, like seatposts, handlebars and stems. SuperGrip solves the problem of carbon parts moving and slipping, which can happen if they are not lubed, or you apply standard grease or lube to them. It also works well with aluminum and steel components.
$13.95
HPG-1 Park Tool High Performance Grease is proprietarily blended to meet the demanding needs of today’s high performance bicycles and high end components. -Superior adherence and extended lubrication life -Extreme temperature range: -20°F to 540°F (-29°C to 282°C) -Highly water resistant -Perfect for high end applications including precision ground and ceramic bearings, pivots and suspension components 4-ounce (113 g) tube
$17.95
Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in Park's CM-5.2 Cyclone Chain Scrubber or as a general purpose degreaser. It won't harm alloy, plastic, or rubber parts. Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush. 16-ounce bottle
$17.95
Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.
$17.95
Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.
$19.95
The use of cutting oil or fluid is extremely important when performing any cutting, tapping, facing or reaming operation and Park's Cutting Fluid is a high quality, environmentally safe cutting fluid that extends tool life and makes any frame prep job easier and safer. CF-2 can effectively be used on all metals.
$19.95
Fills gaps and helps retain non-threaded parts like Press-fit bottom bracket parts, sealed bearings etc. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.
$28.95
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.
$43.95
A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. The Chain Gang includes: - CM-5.3 Cyclone Chain Scrubber - GSC-1 GearClean Brush - 8 oz. bottle of Bio ChainBrite The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.
$15.99
Pelli’s EcoCLEAN is a revolutionary DRE (direct release to the environment) cleaner and degreaser designed specifically to remove stubborn stuck on mud, dirt, and road grime from metal alloy and carbon fiber road and mountain bike frames. Utilizing naturally derived environmentally friendly surfactants and degreasing agents, this high-foaming and high-wetting detergent formula sticks to organic compounds and road grime, loosening them from your delicate finish and allowing them to be easily hosed off from areas inaccessible by brushes or towels. Containing EPA approved natural ingredients, EcoCLEAN is safe on all bike finishes and can be used full-strength or diluted depending on the degree of contamination. Unlike most automotive degreasers with harsh chemicals and lingering chemical odors, EcoCLEAN is safe for the environment and has a pleasant citrus scent and non-toxic formula with the power to restore your frame to its original showroom shine. Want to know more? Dive deep into the technology and usage behind PELLI EcoCLEAN here. FEATURES pH Neutral DRE formula is safe on all surfaces and offers powerful cleaning performance. Safe on painted and raw carbon, alloy, and anodized surfaces. High-foaming spray formula attaches to stuck on contaminants and in hard-to-reach spaces, dissolving them for easy spray off. Non-Toxic formula with orange citrus scent is safe for application on paint, carbon fiber, alloy, plastic, rubber, and even on protective tape.
$16.99
PELLI WATERLESS WASH is a technologically advanced waterless cleaner and detailer engineered specifically to clean and maintain your bike between regular deep cleanings. Safe on carbon fiber and metal-alloy frames and components, our advanced formula lubricates as it cleans, preventing streaking or scratching, and leaves behind a rich streak-free gloss on painted and clear-coated frames. Our all-in-one solution requires no hose, water supply, or messy bucket and sponge, and is one of the most flexible and easy to use products we offer. Pack with your bike and simply spray on after your ride at the trailhead, parking lot, or in your garage and wipe clean with a fresh microfiber towel. Used as a regular part of your post-ride maintenance, WATERLESS WASH will lengthen the amount of time required between deep cleanings - allowing you to CLEAN LESS, RIDE MORE. FEATURES Unique formula cleans as it shines - safely removing light contamination from your bike without scratching or streaking. Easy application with spray-on, wipe-off formula. Enhances appearance with deep mirror shine on painted frames and smooth, streak-free perfection on matte carbon fiber. Extends the life of your PELLI CERAMIC PROTECT coating. Non-Toxic formula with pleasant scent is safe for application on paint, carbon fiber, alloy, plastic, rubber, and even on protective tape.
$19.99
PELLI CERAMIC MAINTAIN is a revolutionary 3-in-1 supercar-grade, concentrated, ceramic-infused cleaner and detailer designed specifically to maintain and detail today’s advanced metal-alloy and carbon fiber mountain and road bike frames. Using our advanced nanotechnology formula, just a few sprays of CERAMIC MAINTAIN cuts through dirt, oil, grease, and grime to clean your frame, bars, fork, and wheels without streaking or scratching, while leaving behind a deep mirror shine on painted surfaces and smooth matte perfection on carbon fiber and raw or anodized alloys. The unique ceramic-infused formula fills microscopic pores and imperfections in your frame and instantly seals them from the elements while providing an ultra-slick hydrophobic coating that resists further buildup of organic contaminants. Specially formulated for today’s advanced road and mountain bike frame technology, CERAMIC MAINTAIN will boost and extend the life of PELLI CERAMIC PROTECT coating and keep your bike cleaner for longer while providing dramatically easier maintenance and cleaning in all conditions. Want to know more? Dive deep into the technology and usage behind PELLI Ceramic MAINTAIN here. FEATURES: Concentrated formula for maximum cleaning power. Just a few sprays cleans, conditions, and shines your frame. 3 Advanced Formulas in 1 Bottle: Clean, Condition, and Protect in one easy application. Maintain your ride’s lubricated surfaces with true waterless application. Simply spray on to contaminated surfaces and wipe off with a clean microfiber towel. Extends the life of your CERAMIC PROTECT coated frame and components. Leaves behind a durable layer of protection that sheds dirt, water, and contaminants. Non-Toxic formula with tropical orange scent is safe for application on paint, carbon fiber, alloy, plastic, rubber, and even on protective tape and custom-fit bike protection kits.